From hege.trosvik at usit.uio.no Wed May 16 10:36:47 2018 From: hege.trosvik at usit.uio.no (Hege Trosvik) Date: Wed, 16 May 2018 11:36:47 +0200 Subject: [ixpmanager] Customer-editable/viewable options Message-ID: <20180516093646.GC9776@ulrik.uio.no> Barry, it looks like the customer can not edit certain values like "Peering Policy", "Peering Macro", "IRRDB Source", "Max Prefixes", is this correct and intended by design? Seems it would be nice (save us some work) to let them edit at least some of these. Also, we have not been able to find a way for the customer to see (not edit) their bgp password for the route-server in ixpmanager, this would certainly be very helpful, as I guess we now have to send this by email. Have you considered this? Hege From kyle at stormzero.com Wed May 16 17:54:27 2018 From: kyle at stormzero.com (Kyle Spencer) Date: Wed, 16 May 2018 12:54:27 -0400 Subject: [ixpmanager] Customer-editable/viewable options In-Reply-To: <20180516093646.GC9776@ulrik.uio.no> References: <20180516093646.GC9776@ulrik.uio.no> Message-ID: +1 On Wed, May 16, 2018 at 5:36 AM, Hege Trosvik wrote: > > Barry, > > it looks like the customer can not edit certain values like > "Peering Policy", "Peering Macro", "IRRDB Source", "Max Prefixes", > is this correct and intended by design? Seems it would be nice > (save us some work) to let them edit at least some of these. > > Also, we have not been able to find a way for the customer to > see (not edit) their bgp password for the route-server in ixpmanager, > this would certainly be very helpful, as I guess we now have to send > this by email. Have you considered this? > > Hege > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager -- Cell/WhatsApp/Signal: +256790884905 From barry.odonovan at inex.ie Wed May 16 19:58:49 2018 From: barry.odonovan at inex.ie (Barry O'Donovan) Date: Wed, 16 May 2018 19:58:49 +0100 Subject: [ixpmanager] Customer-editable/viewable options In-Reply-To: <20180516093646.GC9776@ulrik.uio.no> References: <20180516093646.GC9776@ulrik.uio.no> Message-ID: <58337bf2-cc72-af4e-5238-b5afc248d08d@inex.ie> Hi Hege, what you say below is correct. We have plans to add this functionality in the latter part of 2018. - Barry Hege Trosvik wrote: > > Barry, > > it looks like the customer can not edit certain values like > "Peering Policy", "Peering Macro", "IRRDB Source", "Max Prefixes", > is this correct and intended by design? Seems it would be nice > (save us some work) to let them edit at least some of these. > > Also, we have not been able to find a way for the customer to > see (not edit) their bgp password for the route-server in ixpmanager, > this would certainly be very helpful, as I guess we now have to send > this by email. Have you considered this? > > Hege > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > -- Kind regards, Barry O'Donovan INEX Operations https://www.inex.ie/support/ +353 1 531 3339 From giokajana at gmail.com Mon May 21 07:06:38 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Mon, 21 May 2018 10:06:38 +0400 Subject: [ixpmanager] Adding Switch Message-ID: Hello , How to add switch in ixpmanager? what must i type in SNMP community to add switch? my switch is using Snmp -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Mon May 21 09:58:32 2018 From: nick at inex.ie (Nick Hilliard) Date: Mon, 21 May 2018 09:58:32 +0100 Subject: [ixpmanager] Adding Switch Message-ID: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> The SNMP community on a switch is whatever you set the value to be on the switch. The default value on many switches is "public". Nick > Giorgi Kajaia > 21 May 2018 at 07:06 > Hello , > > How to add switch in ixpmanager? what must i type in SNMP community > to add switch? my switch is using Snmp > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 07:31:49 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 10:31:49 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> Message-ID: Hello, When i added my switch in ixp manager it doesn't work, snmp can't get port details, im sure that snmp is correctly set on my switch, what could be issue? ixp manager is new installed from automated script . On Mon, May 21, 2018 at 6:47 PM, Nick Hilliard wrote: > Hi Giorgi, > > can you to ixpmanager at inex.ie and I'll reply to your email from there? > > Nick > > Giorgi Kajaia > 21 May 2018 at 10:03 > I have added switch , but it cant get port info from snmp , what could be > issue ? > > > Nick Hilliard > 21 May 2018 at 09:58 > The SNMP community on a switch is whatever you set the value to be on the > switch. The default value on many switches is "public". > > Nick > > ------------------------------ > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Tue May 22 11:19:11 2018 From: nick at inex.ie (Nick Hilliard) Date: Tue, 22 May 2018 11:19:11 +0100 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> Message-ID: <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> What brand / model of switch are you using? It's possible that what you're using is not yet supported by OSS_SNMP, which is the snmp library used in IXP Manager. Nick > Giorgi Kajaia > 22 May 2018 at 07:31 > Hello, > When i added my switch in ixp manager it doesn't work, snmp can't get > port details, im sure that snmp is correctly set on my switch, what > could be issue? ixp manager is new installed from automated script . > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 21 May 2018 at 15:47 > Hi Giorgi, > > can you to ixpmanager at inex.ie and I'll reply to your email from there? > > Nick > > Nick Hilliard > 21 May 2018 at 09:58 > The SNMP community on a switch is whatever you set the value to be on > the switch. The default value on many switches is "public". > > Nick > -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 11:20:39 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 14:20:39 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> Message-ID: Its cisco 4950 On Tue, May 22, 2018 at 2:19 PM, Nick Hilliard wrote: > What brand / model of switch are you using? It's possible that what > you're using is not yet supported by OSS_SNMP, which is the snmp library > used in IXP Manager. > > Nick > > Giorgi Kajaia > 22 May 2018 at 07:31 > Hello, > When i added my switch in ixp manager it doesn't work, snmp can't get port > details, im sure that snmp is correctly set on my switch, what could be > issue? ixp manager is new installed from automated script . > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 21 May 2018 at 15:47 > Hi Giorgi, > > can you to ixpmanager at inex.ie and I'll reply to your email from there? > > Nick > > Nick Hilliard > 21 May 2018 at 09:58 > The SNMP community on a switch is whatever you set the value to be on the > switch. The default value on many switches is "public". > > Nick > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 11:35:52 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 14:35:52 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> Message-ID: i got 2 switch , also using 3550 cisco On Tue, May 22, 2018 at 2:20 PM, Giorgi Kajaia wrote: > Its cisco 4950 > > On Tue, May 22, 2018 at 2:19 PM, Nick Hilliard wrote: > >> What brand / model of switch are you using? It's possible that what >> you're using is not yet supported by OSS_SNMP, which is the snmp library >> used in IXP Manager. >> >> Nick >> >> Giorgi Kajaia >> 22 May 2018 at 07:31 >> Hello, >> When i added my switch in ixp manager it doesn't work, snmp can't get >> port details, im sure that snmp is correctly set on my switch, what could >> be issue? ixp manager is new installed from automated script . >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> Nick Hilliard >> 21 May 2018 at 15:47 >> Hi Giorgi, >> >> can you to ixpmanager at inex.ie and I'll reply to your email from there? >> >> Nick >> >> Nick Hilliard >> 21 May 2018 at 09:58 >> The SNMP community on a switch is whatever you set the value to be on the >> switch. The default value on many switches is "public". >> >> Nick >> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Tue May 22 12:09:34 2018 From: nick at inex.ie (Nick Hilliard) Date: Tue, 22 May 2018 12:09:34 +0100 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> Message-ID: There is no cisco model 4950. Did you mean Cisco 4948? Did IXP Manager print any error messages? E.g. "Could not interpret switch system description string"? Nick > Giorgi Kajaia > 22 May 2018 at 11:35 > i got 2 switch , also using 3550 cisco > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Giorgi Kajaia > 22 May 2018 at 11:20 > Its cisco 4950 > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 22 May 2018 at 11:19 > What brand / model of switch are you using? It's possible that what > you're using is not yet supported by OSS_SNMP, which is the snmp > library used in IXP Manager. > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 21 May 2018 at 15:47 > Hi Giorgi, > > can you to ixpmanager at inex.ie and I'll reply to your email from there? > > Nick > > Nick Hilliard > 21 May 2018 at 09:58 > The SNMP community on a switch is whatever you set the value to be on > the switch. The default value on many switches is "public". > > Nick > -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 12:12:09 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 15:12:09 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> Message-ID: Yes sorry 4948. When im trying to add switch via snmp it doesnot work so when i add switch manualy . and click view/edit ports via snmp i get error Error polling switch via SNMP. On Tue, May 22, 2018 at 3:09 PM, Nick Hilliard wrote: > There is no cisco model 4950. Did you mean Cisco 4948? > > Did IXP Manager print any error messages? E.g. "Could not interpret switch > system description string"? > > Nick > > Giorgi Kajaia > 22 May 2018 at 11:35 > i got 2 switch , also using 3550 cisco > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Giorgi Kajaia > 22 May 2018 at 11:20 > Its cisco 4950 > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 22 May 2018 at 11:19 > What brand / model of switch are you using? It's possible that what > you're using is not yet supported by OSS_SNMP, which is the snmp library > used in IXP Manager. > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 21 May 2018 at 15:47 > Hi Giorgi, > > can you to ixpmanager at inex.ie and I'll reply to your email from there? > > Nick > > Nick Hilliard > 21 May 2018 at 09:58 > The SNMP community on a switch is whatever you set the value to be on the > switch. The default value on many switches is "public". > > Nick > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Tue May 22 12:19:54 2018 From: nick at inex.ie (Nick Hilliard) Date: Tue, 22 May 2018 12:19:54 +0100 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> Message-ID: <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> "Error polling switch via SNMP" means that IXP Manager cannot contact the switch. Can you run this from the command line: # snmpwalk -v 2c -c ... where "" is the community you defined on the switch and is the IP address or hostname of the switch? This should return a pile of output. If it returns nothing, then snmp is misconfigured on the switch, or the ixp manager host cannot contact the switch. Nick > Giorgi Kajaia > 22 May 2018 at 12:12 > Yes sorry 4948. > When im trying to add switch via snmp it doesnot work > so when i add switch manualy . and click view/edit ports via snmp i > get error Error polling switch via SNMP. > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 22 May 2018 at 12:09 > There is no cisco model 4950. Did you mean Cisco 4948? > > Did IXP Manager print any error messages? E.g. "Could not interpret > switch system description string"? > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 21 May 2018 at 15:47 > Hi Giorgi, > > can you to ixpmanager at inex.ie and I'll reply to your email from there? > > Nick > > Nick Hilliard > 21 May 2018 at 09:58 > The SNMP community on a switch is whatever you set the value to be on > the switch. The default value on many switches is "public". > > Nick > -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 12:29:30 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 15:29:30 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> Message-ID: Yes It has returned pile of output ... so what could be issue of ixpmanager cannot contact the switch ? On Tue, May 22, 2018 at 3:21 PM, Giorgi Kajaia wrote: > Yes It has returned pile of output ... > > so what could be issue of ixpmanager cannot contact the switch ? > > On Tue, May 22, 2018 at 3:19 PM, Nick Hilliard wrote: > >> "Error polling switch via SNMP" means that IXP Manager cannot contact the >> switch. >> >> Can you run this from the command line: >> >> # snmpwalk -v 2c -c >> >> ... where "" is the community you defined on the switch >> and is the IP address or hostname of the switch? >> >> This should return a pile of output. If it returns nothing, then snmp is >> misconfigured on the switch, or the ixp manager host cannot contact the >> switch. >> >> Nick >> >> Giorgi Kajaia >> 22 May 2018 at 12:12 >> Yes sorry 4948. >> When im trying to add switch via snmp it doesnot work >> so when i add switch manualy . and click view/edit ports via snmp i get >> error Error polling switch via SNMP. >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> Nick Hilliard >> 22 May 2018 at 12:09 >> There is no cisco model 4950. Did you mean Cisco 4948? >> >> Did IXP Manager print any error messages? E.g. "Could not interpret >> switch system description string"? >> >> Nick >> >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> Nick Hilliard >> 21 May 2018 at 15:47 >> Hi Giorgi, >> >> can you to ixpmanager at inex.ie and I'll reply to your email from there? >> >> Nick >> >> Nick Hilliard >> 21 May 2018 at 09:58 >> The SNMP community on a switch is whatever you set the value to be on the >> switch. The default value on many switches is "public". >> >> Nick >> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Tue May 22 12:30:05 2018 From: nick at inex.ie (Nick Hilliard) Date: Tue, 22 May 2018 12:30:05 +0100 Subject: [ixpmanager] Adding Switch In-Reply-To: <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> Message-ID: First, delete the switch, and use the "Add New Switch (via SNMP) " wizard to re-add the switch. https://www.example.org/ixp/switch/add-by-snmp If you put the hostname () into the Hostname field, and whatever you used for in the "SNMP Community" field, it should work fine. Don't use the "Manual / Non-SNMP Add" option. Also, as it's a cisco switch, please make sure that the SNMP community does not contain the "@" symbol. It may be helpful if you worked through the tutorial at: https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manager-workshop2-installation-2018-02-25.pdf Nick > Giorgi Kajaia > 22 May 2018 at 12:21 > Yes It has returned pile of output ... > > so what could be issue of ixpmanager cannot contact the switch ? > > > Nick Hilliard > 22 May 2018 at 12:09 > There is no cisco model 4950. Did you mean Cisco 4948? > > Did IXP Manager print any error messages? E.g. "Could not interpret > switch system description string"? > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 21 May 2018 at 15:47 > Hi Giorgi, > > can you to ixpmanager at inex.ie and I'll reply to your email from there? > > Nick > > Nick Hilliard > 21 May 2018 at 09:58 > The SNMP community on a switch is whatever you set the value to be on > the switch. The default value on many switches is "public". > > Nick > -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 12:36:19 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 15:36:19 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> Message-ID: this is my snmp config for switch : snmp-server community public RO snmp-server community private RW snmp-server user private private v1 snmp-server user private private v2c so what should i type in SNMP community filed ? i tried public, private, user, but does not work ... error type is Could not query newtelco via SNMP. Consider using the the manual add method . On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard wrote: > First, delete the switch, and use the "Add New Switch (via SNMP) " wizard > to re-add the switch. > > https://www.example.org/ixp/switch/add-by-snmp > > If you put the hostname () into the Hostname field, and whatever > you used for in the "SNMP Community" field, it should work > fine. > > Don't use the "Manual / Non-SNMP Add" option. > > Also, as it's a cisco switch, please make sure that the SNMP community > does not contain the "@" symbol. > > It may be helpful if you worked through the tutorial at: > > https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manager-workshop2- > installation-2018-02-25.pdf > > Nick > > Giorgi Kajaia > 22 May 2018 at 12:21 > Yes It has returned pile of output ... > > so what could be issue of ixpmanager cannot contact the switch ? > > > Nick Hilliard > 22 May 2018 at 12:09 > There is no cisco model 4950. Did you mean Cisco 4948? > > Did IXP Manager print any error messages? E.g. "Could not interpret switch > system description string"? > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 21 May 2018 at 15:47 > Hi Giorgi, > > can you to ixpmanager at inex.ie and I'll reply to your email from there? > > Nick > > Nick Hilliard > 21 May 2018 at 09:58 > The SNMP community on a switch is whatever you set the value to be on the > switch. The default value on many switches is "public". > > Nick > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jmeyers at webbytech.net Tue May 22 12:37:19 2018 From: jmeyers at webbytech.net (Josh Meyers) Date: Tue, 22 May 2018 07:37:19 -0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> Message-ID: <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> Can your ixp manager switch ping the switch and vice versa? Can you snmpwalk from the server? Sent from my iPhone > On May 22, 2018, at 7:36 AM, Giorgi Kajaia wrote: > > this is my snmp config for switch : > snmp-server community public RO > snmp-server community private RW > snmp-server user private private v1 > snmp-server user private private v2c > > so what should i type in SNMP community filed ? i tried public, private, user, but does not work ... error type is Could not query newtelco via SNMP. Consider using the the manual add method. > > >> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard wrote: >> First, delete the switch, and use the "Add New Switch (via SNMP) " wizard to re-add the switch. >> >> https://www.example.org/ixp/switch/add-by-snmp >> >> If you put the hostname () into the Hostname field, and whatever you used for in the "SNMP Community" field, it should work fine. >> >> Don't use the "Manual / Non-SNMP Add" option. >> >> Also, as it's a cisco switch, please make sure that the SNMP community does not contain the "@" symbol. >> >> It may be helpful if you worked through the tutorial at: >> >> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manager-workshop2-installation-2018-02-25.pdf >> >> Nick >>> Giorgi Kajaia 22 May 2018 at 12:21 >>> Yes It has returned pile of output ... >>> >>> so what could be issue of ixpmanager cannot contact the switch ? >>> >>> >>> Nick Hilliard 22 May 2018 at 12:09 >>> There is no cisco model 4950. Did you mean Cisco 4948? >>> >>> Did IXP Manager print any error messages? E.g. "Could not interpret switch system description string"? >>> >>> Nick >>> >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> Nick Hilliard 21 May 2018 at 15:47 >>> Hi Giorgi, >>> >>> can you to ixpmanager at inex.ie and I'll reply to your email from there? >>> >>> Nick >>> >>> Nick Hilliard 21 May 2018 at 09:58 >>> The SNMP community on a switch is whatever you set the value to be on the switch. The default value on many switches is "public". >>> >>> Nick >>> >> > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 12:38:33 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 15:38:33 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> Message-ID: Josh, yes Nick already told me that and from server i can do snmpwalk On Tue, May 22, 2018 at 3:37 PM, Josh Meyers wrote: > Can your ixp manager switch ping the switch and vice versa? Can you > snmpwalk from the server? > > Sent from my iPhone > > On May 22, 2018, at 7:36 AM, Giorgi Kajaia wrote: > > this is my snmp config for switch : > snmp-server community public RO > snmp-server community private RW > snmp-server user private private v1 > snmp-server user private private v2c > > so what should i type in SNMP community filed ? i tried public, private, > user, but does not work ... error type is Could not query newtelco via > SNMP. Consider using the the manual add method > . > > > On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard wrote: > >> First, delete the switch, and use the "Add New Switch (via SNMP) " wizard >> to re-add the switch. >> >> https://www.example.org/ixp/switch/add-by-snmp >> >> If you put the hostname () into the Hostname field, and whatever >> you used for in the "SNMP Community" field, it should work >> fine. >> >> Don't use the "Manual / Non-SNMP Add" option. >> >> Also, as it's a cisco switch, please make sure that the SNMP community >> does not contain the "@" symbol. >> >> It may be helpful if you worked through the tutorial at: >> >> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manag >> er-workshop2-installation-2018-02-25.pdf >> >> Nick >> >> Giorgi Kajaia >> 22 May 2018 at 12:21 >> Yes It has returned pile of output ... >> >> so what could be issue of ixpmanager cannot contact the switch ? >> >> >> Nick Hilliard >> 22 May 2018 at 12:09 >> There is no cisco model 4950. Did you mean Cisco 4948? >> >> Did IXP Manager print any error messages? E.g. "Could not interpret >> switch system description string"? >> >> Nick >> >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> Nick Hilliard >> 21 May 2018 at 15:47 >> Hi Giorgi, >> >> can you to ixpmanager at inex.ie and I'll reply to your email from there? >> >> Nick >> >> Nick Hilliard >> 21 May 2018 at 09:58 >> The SNMP community on a switch is whatever you set the value to be on the >> switch. The default value on many switches is "public". >> >> Nick >> >> >> > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jmeyers at webbytech.net Tue May 22 12:40:06 2018 From: jmeyers at webbytech.net (Josh Meyers) Date: Tue, 22 May 2018 07:40:06 -0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> Message-ID: What version of ixp have you installed? Sent from my iPhone > On May 22, 2018, at 7:38 AM, Giorgi Kajaia wrote: > > Josh, > > yes Nick already told me that and from server i can do snmpwalk > >> On Tue, May 22, 2018 at 3:37 PM, Josh Meyers wrote: >> Can your ixp manager switch ping the switch and vice versa? Can you snmpwalk from the server? >> >> Sent from my iPhone >> >>> On May 22, 2018, at 7:36 AM, Giorgi Kajaia wrote: >>> >>> this is my snmp config for switch : >>> snmp-server community public RO >>> snmp-server community private RW >>> snmp-server user private private v1 >>> snmp-server user private private v2c >>> >>> so what should i type in SNMP community filed ? i tried public, private, user, but does not work ... error type is Could not query newtelco via SNMP. Consider using the the manual add method. >>> >>> >>>> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard wrote: >>>> First, delete the switch, and use the "Add New Switch (via SNMP) " wizard to re-add the switch. >>>> >>>> https://www.example.org/ixp/switch/add-by-snmp >>>> >>>> If you put the hostname () into the Hostname field, and whatever you used for in the "SNMP Community" field, it should work fine. >>>> >>>> Don't use the "Manual / Non-SNMP Add" option. >>>> >>>> Also, as it's a cisco switch, please make sure that the SNMP community does not contain the "@" symbol. >>>> >>>> It may be helpful if you worked through the tutorial at: >>>> >>>> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manager-workshop2-installation-2018-02-25.pdf >>>> >>>> Nick >>>>> Giorgi Kajaia 22 May 2018 at 12:21 >>>>> Yes It has returned pile of output ... >>>>> >>>>> so what could be issue of ixpmanager cannot contact the switch ? >>>>> >>>>> >>>>> Nick Hilliard 22 May 2018 at 12:09 >>>>> There is no cisco model 4950. Did you mean Cisco 4948? >>>>> >>>>> Did IXP Manager print any error messages? E.g. "Could not interpret switch system description string"? >>>>> >>>>> Nick >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> Nick Hilliard 21 May 2018 at 15:47 >>>>> Hi Giorgi, >>>>> >>>>> can you to ixpmanager at inex.ie and I'll reply to your email from there? >>>>> >>>>> Nick >>>>> >>>>> Nick Hilliard 21 May 2018 at 09:58 >>>>> The SNMP community on a switch is whatever you set the value to be on the switch. The default value on many switches is "public". >>>>> >>>>> Nick >>>>> >>>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 12:40:51 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 15:40:51 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> Message-ID: Josh, Version 4.7.3 On Tue, May 22, 2018 at 3:40 PM, Josh Meyers wrote: > What version of ixp have you installed? > > Sent from my iPhone > > On May 22, 2018, at 7:38 AM, Giorgi Kajaia wrote: > > Josh, > > yes Nick already told me that and from server i can do snmpwalk > > On Tue, May 22, 2018 at 3:37 PM, Josh Meyers > wrote: > >> Can your ixp manager switch ping the switch and vice versa? Can you >> snmpwalk from the server? >> >> Sent from my iPhone >> >> On May 22, 2018, at 7:36 AM, Giorgi Kajaia wrote: >> >> this is my snmp config for switch : >> snmp-server community public RO >> snmp-server community private RW >> snmp-server user private private v1 >> snmp-server user private private v2c >> >> so what should i type in SNMP community filed ? i tried public, private, >> user, but does not work ... error type is Could not query newtelco via >> SNMP. Consider using the the manual add method >> . >> >> >> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard wrote: >> >>> First, delete the switch, and use the "Add New Switch (via SNMP) " >>> wizard to re-add the switch. >>> >>> https://www.example.org/ixp/switch/add-by-snmp >>> >>> If you put the hostname () into the Hostname field, and >>> whatever you used for in the "SNMP Community" field, it >>> should work fine. >>> >>> Don't use the "Manual / Non-SNMP Add" option. >>> >>> Also, as it's a cisco switch, please make sure that the SNMP community >>> does not contain the "@" symbol. >>> >>> It may be helpful if you worked through the tutorial at: >>> >>> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manag >>> er-workshop2-installation-2018-02-25.pdf >>> >>> Nick >>> >>> Giorgi Kajaia >>> 22 May 2018 at 12:21 >>> Yes It has returned pile of output ... >>> >>> so what could be issue of ixpmanager cannot contact the switch ? >>> >>> >>> Nick Hilliard >>> 22 May 2018 at 12:09 >>> There is no cisco model 4950. Did you mean Cisco 4948? >>> >>> Did IXP Manager print any error messages? E.g. "Could not interpret >>> switch system description string"? >>> >>> Nick >>> >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> Nick Hilliard >>> 21 May 2018 at 15:47 >>> Hi Giorgi, >>> >>> can you to ixpmanager at inex.ie and I'll reply to your email from there? >>> >>> Nick >>> >>> Nick Hilliard >>> 21 May 2018 at 09:58 >>> The SNMP community on a switch is whatever you set the value to be on >>> the switch. The default value on many switches is "public". >>> >>> Nick >>> >>> >>> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> >> > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 12:44:16 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 15:44:16 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> Message-ID: Did it,, thanks guys for support :) On Tue, May 22, 2018 at 3:40 PM, Giorgi Kajaia wrote: > Josh, > Version 4.7.3 > > On Tue, May 22, 2018 at 3:40 PM, Josh Meyers > wrote: > >> What version of ixp have you installed? >> >> Sent from my iPhone >> >> On May 22, 2018, at 7:38 AM, Giorgi Kajaia wrote: >> >> Josh, >> >> yes Nick already told me that and from server i can do snmpwalk >> >> On Tue, May 22, 2018 at 3:37 PM, Josh Meyers >> wrote: >> >>> Can your ixp manager switch ping the switch and vice versa? Can you >>> snmpwalk from the server? >>> >>> Sent from my iPhone >>> >>> On May 22, 2018, at 7:36 AM, Giorgi Kajaia wrote: >>> >>> this is my snmp config for switch : >>> snmp-server community public RO >>> snmp-server community private RW >>> snmp-server user private private v1 >>> snmp-server user private private v2c >>> >>> so what should i type in SNMP community filed ? i tried public, >>> private, user, but does not work ... error type is Could not query >>> newtelco via SNMP. Consider using the the manual add method >>> . >>> >>> >>> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard wrote: >>> >>>> First, delete the switch, and use the "Add New Switch (via SNMP) " >>>> wizard to re-add the switch. >>>> >>>> https://www.example.org/ixp/switch/add-by-snmp >>>> >>>> If you put the hostname () into the Hostname field, and >>>> whatever you used for in the "SNMP Community" field, it >>>> should work fine. >>>> >>>> Don't use the "Manual / Non-SNMP Add" option. >>>> >>>> Also, as it's a cisco switch, please make sure that the SNMP community >>>> does not contain the "@" symbol. >>>> >>>> It may be helpful if you worked through the tutorial at: >>>> >>>> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manag >>>> er-workshop2-installation-2018-02-25.pdf >>>> >>>> Nick >>>> >>>> Giorgi Kajaia >>>> 22 May 2018 at 12:21 >>>> Yes It has returned pile of output ... >>>> >>>> so what could be issue of ixpmanager cannot contact the switch ? >>>> >>>> >>>> Nick Hilliard >>>> 22 May 2018 at 12:09 >>>> There is no cisco model 4950. Did you mean Cisco 4948? >>>> >>>> Did IXP Manager print any error messages? E.g. "Could not interpret >>>> switch system description string"? >>>> >>>> Nick >>>> >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> Nick Hilliard >>>> 21 May 2018 at 15:47 >>>> Hi Giorgi, >>>> >>>> can you to ixpmanager at inex.ie and I'll reply to your email from >>>> there? >>>> >>>> Nick >>>> >>>> Nick Hilliard >>>> 21 May 2018 at 09:58 >>>> The SNMP community on a switch is whatever you set the value to be on >>>> the switch. The default value on many switches is "public". >>>> >>>> Nick >>>> >>>> >>>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> >>> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 12:58:06 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 15:58:06 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> Message-ID: one more question, i have added switch now i want to display graph of specified port . how i can do that? in graph it shows nothing its dummy. On Tue, May 22, 2018 at 3:44 PM, Giorgi Kajaia wrote: > Did it,, > > thanks guys for support :) > > On Tue, May 22, 2018 at 3:40 PM, Giorgi Kajaia > wrote: > >> Josh, >> Version 4.7.3 >> >> On Tue, May 22, 2018 at 3:40 PM, Josh Meyers >> wrote: >> >>> What version of ixp have you installed? >>> >>> Sent from my iPhone >>> >>> On May 22, 2018, at 7:38 AM, Giorgi Kajaia wrote: >>> >>> Josh, >>> >>> yes Nick already told me that and from server i can do snmpwalk >>> >>> On Tue, May 22, 2018 at 3:37 PM, Josh Meyers >>> wrote: >>> >>>> Can your ixp manager switch ping the switch and vice versa? Can you >>>> snmpwalk from the server? >>>> >>>> Sent from my iPhone >>>> >>>> On May 22, 2018, at 7:36 AM, Giorgi Kajaia wrote: >>>> >>>> this is my snmp config for switch : >>>> snmp-server community public RO >>>> snmp-server community private RW >>>> snmp-server user private private v1 >>>> snmp-server user private private v2c >>>> >>>> so what should i type in SNMP community filed ? i tried public, >>>> private, user, but does not work ... error type is Could not query >>>> newtelco via SNMP. Consider using the the manual add method >>>> . >>>> >>>> >>>> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard wrote: >>>> >>>>> First, delete the switch, and use the "Add New Switch (via SNMP) " >>>>> wizard to re-add the switch. >>>>> >>>>> https://www.example.org/ixp/switch/add-by-snmp >>>>> >>>>> If you put the hostname () into the Hostname field, and >>>>> whatever you used for in the "SNMP Community" field, it >>>>> should work fine. >>>>> >>>>> Don't use the "Manual / Non-SNMP Add" option. >>>>> >>>>> Also, as it's a cisco switch, please make sure that the SNMP community >>>>> does not contain the "@" symbol. >>>>> >>>>> It may be helpful if you worked through the tutorial at: >>>>> >>>>> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manag >>>>> er-workshop2-installation-2018-02-25.pdf >>>>> >>>>> Nick >>>>> >>>>> Giorgi Kajaia >>>>> 22 May 2018 at 12:21 >>>>> Yes It has returned pile of output ... >>>>> >>>>> so what could be issue of ixpmanager cannot contact the switch ? >>>>> >>>>> >>>>> Nick Hilliard >>>>> 22 May 2018 at 12:09 >>>>> There is no cisco model 4950. Did you mean Cisco 4948? >>>>> >>>>> Did IXP Manager print any error messages? E.g. "Could not interpret >>>>> switch system description string"? >>>>> >>>>> Nick >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> Nick Hilliard >>>>> 21 May 2018 at 15:47 >>>>> Hi Giorgi, >>>>> >>>>> can you to ixpmanager at inex.ie and I'll reply to your email from >>>>> there? >>>>> >>>>> Nick >>>>> >>>>> Nick Hilliard >>>>> 21 May 2018 at 09:58 >>>>> The SNMP community on a switch is whatever you set the value to be on >>>>> the switch. The default value on many switches is "public". >>>>> >>>>> Nick >>>>> >>>>> >>>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jmeyers at webbytech.net Tue May 22 13:02:37 2018 From: jmeyers at webbytech.net (Josh Meyers) Date: Tue, 22 May 2018 08:02:37 -0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> Message-ID: <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> Did you follow instructions for enabling graphs? Sent from my iPhone > On May 22, 2018, at 7:58 AM, Giorgi Kajaia wrote: > > one more question, i have added switch now i want to display graph of specified port . how i can do that? in graph it shows nothing its dummy. > >> On Tue, May 22, 2018 at 3:44 PM, Giorgi Kajaia wrote: >> Did it,, >> >> thanks guys for support :) >> >>> On Tue, May 22, 2018 at 3:40 PM, Giorgi Kajaia wrote: >>> Josh, >>> Version 4.7.3 >>> >>>> On Tue, May 22, 2018 at 3:40 PM, Josh Meyers wrote: >>>> What version of ixp have you installed? >>>> >>>> Sent from my iPhone >>>> >>>>> On May 22, 2018, at 7:38 AM, Giorgi Kajaia wrote: >>>>> >>>>> Josh, >>>>> >>>>> yes Nick already told me that and from server i can do snmpwalk >>>>> >>>>>> On Tue, May 22, 2018 at 3:37 PM, Josh Meyers wrote: >>>>>> Can your ixp manager switch ping the switch and vice versa? Can you snmpwalk from the server? >>>>>> >>>>>> Sent from my iPhone >>>>>> >>>>>>> On May 22, 2018, at 7:36 AM, Giorgi Kajaia wrote: >>>>>>> >>>>>>> this is my snmp config for switch : >>>>>>> snmp-server community public RO >>>>>>> snmp-server community private RW >>>>>>> snmp-server user private private v1 >>>>>>> snmp-server user private private v2c >>>>>>> >>>>>>> so what should i type in SNMP community filed ? i tried public, private, user, but does not work ... error type is Could not query newtelco via SNMP. Consider using the the manual add method. >>>>>>> >>>>>>> >>>>>>>> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard wrote: >>>>>>>> First, delete the switch, and use the "Add New Switch (via SNMP) " wizard to re-add the switch. >>>>>>>> >>>>>>>> https://www.example.org/ixp/switch/add-by-snmp >>>>>>>> >>>>>>>> If you put the hostname () into the Hostname field, and whatever you used for in the "SNMP Community" field, it should work fine. >>>>>>>> >>>>>>>> Don't use the "Manual / Non-SNMP Add" option. >>>>>>>> >>>>>>>> Also, as it's a cisco switch, please make sure that the SNMP community does not contain the "@" symbol. >>>>>>>> >>>>>>>> It may be helpful if you worked through the tutorial at: >>>>>>>> >>>>>>>> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manager-workshop2-installation-2018-02-25.pdf >>>>>>>> >>>>>>>> Nick >>>>>>>>> Giorgi Kajaia 22 May 2018 at 12:21 >>>>>>>>> Yes It has returned pile of output ... >>>>>>>>> >>>>>>>>> so what could be issue of ixpmanager cannot contact the switch ? >>>>>>>>> >>>>>>>>> >>>>>>>>> Nick Hilliard 22 May 2018 at 12:09 >>>>>>>>> There is no cisco model 4950. Did you mean Cisco 4948? >>>>>>>>> >>>>>>>>> Did IXP Manager print any error messages? E.g. "Could not interpret switch system description string"? >>>>>>>>> >>>>>>>>> Nick >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> INEX IXP Manager mailing list >>>>>>>>> ixpmanager at inex.ie >>>>>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>>>>> Nick Hilliard 21 May 2018 at 15:47 >>>>>>>>> Hi Giorgi, >>>>>>>>> >>>>>>>>> can you to ixpmanager at inex.ie and I'll reply to your email from there? >>>>>>>>> >>>>>>>>> Nick >>>>>>>>> >>>>>>>>> Nick Hilliard 21 May 2018 at 09:58 >>>>>>>>> The SNMP community on a switch is whatever you set the value to be on the switch. The default value on many switches is "public". >>>>>>>>> >>>>>>>>> Nick >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> INEX IXP Manager mailing list >>>>>>> ixpmanager at inex.ie >>>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>> >>>>>> _______________________________________________ >>>>>> INEX IXP Manager mailing list >>>>>> ixpmanager at inex.ie >>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>> >> > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 13:04:05 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 16:04:05 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> Message-ID: Im not sure, if possible please provide link On Tue, May 22, 2018 at 4:02 PM, Josh Meyers wrote: > Did you follow instructions for enabling graphs? > > Sent from my iPhone > > On May 22, 2018, at 7:58 AM, Giorgi Kajaia wrote: > > one more question, i have added switch now i want to display graph of > specified port . how i can do that? in graph it shows nothing its dummy. > > On Tue, May 22, 2018 at 3:44 PM, Giorgi Kajaia > wrote: > >> Did it,, >> >> thanks guys for support :) >> >> On Tue, May 22, 2018 at 3:40 PM, Giorgi Kajaia >> wrote: >> >>> Josh, >>> Version 4.7.3 >>> >>> On Tue, May 22, 2018 at 3:40 PM, Josh Meyers >>> wrote: >>> >>>> What version of ixp have you installed? >>>> >>>> Sent from my iPhone >>>> >>>> On May 22, 2018, at 7:38 AM, Giorgi Kajaia wrote: >>>> >>>> Josh, >>>> >>>> yes Nick already told me that and from server i can do snmpwalk >>>> >>>> On Tue, May 22, 2018 at 3:37 PM, Josh Meyers >>>> wrote: >>>> >>>>> Can your ixp manager switch ping the switch and vice versa? Can you >>>>> snmpwalk from the server? >>>>> >>>>> Sent from my iPhone >>>>> >>>>> On May 22, 2018, at 7:36 AM, Giorgi Kajaia >>>>> wrote: >>>>> >>>>> this is my snmp config for switch : >>>>> snmp-server community public RO >>>>> snmp-server community private RW >>>>> snmp-server user private private v1 >>>>> snmp-server user private private v2c >>>>> >>>>> so what should i type in SNMP community filed ? i tried public, >>>>> private, user, but does not work ... error type is Could not query >>>>> newtelco via SNMP. Consider using the the manual add method >>>>> . >>>>> >>>>> >>>>> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard wrote: >>>>> >>>>>> First, delete the switch, and use the "Add New Switch (via SNMP) " >>>>>> wizard to re-add the switch. >>>>>> >>>>>> https://www.example.org/ixp/switch/add-by-snmp >>>>>> >>>>>> If you put the hostname () into the Hostname field, and >>>>>> whatever you used for in the "SNMP Community" field, it >>>>>> should work fine. >>>>>> >>>>>> Don't use the "Manual / Non-SNMP Add" option. >>>>>> >>>>>> Also, as it's a cisco switch, please make sure that the SNMP >>>>>> community does not contain the "@" symbol. >>>>>> >>>>>> It may be helpful if you worked through the tutorial at: >>>>>> >>>>>> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manag >>>>>> er-workshop2-installation-2018-02-25.pdf >>>>>> >>>>>> Nick >>>>>> >>>>>> Giorgi Kajaia >>>>>> 22 May 2018 at 12:21 >>>>>> Yes It has returned pile of output ... >>>>>> >>>>>> so what could be issue of ixpmanager cannot contact the switch ? >>>>>> >>>>>> >>>>>> Nick Hilliard >>>>>> 22 May 2018 at 12:09 >>>>>> There is no cisco model 4950. Did you mean Cisco 4948? >>>>>> >>>>>> Did IXP Manager print any error messages? E.g. "Could not interpret >>>>>> switch system description string"? >>>>>> >>>>>> Nick >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> INEX IXP Manager mailing list >>>>>> ixpmanager at inex.ie >>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>> Nick Hilliard >>>>>> 21 May 2018 at 15:47 >>>>>> Hi Giorgi, >>>>>> >>>>>> can you to ixpmanager at inex.ie and I'll reply to your email from >>>>>> there? >>>>>> >>>>>> Nick >>>>>> >>>>>> Nick Hilliard >>>>>> 21 May 2018 at 09:58 >>>>>> The SNMP community on a switch is whatever you set the value to be on >>>>>> the switch. The default value on many switches is "public". >>>>>> >>>>>> Nick >>>>>> >>>>>> >>>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> >>>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>>> >>> >> > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Tue May 22 13:06:29 2018 From: nick at inex.ie (Nick Hilliard) Date: Tue, 22 May 2018 13:06:29 +0100 Subject: [ixpmanager] Adding Switch In-Reply-To: <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> Message-ID: <5d10f76f-460e-8cef-6e8c-ca03bc9845a2@inex.ie> https://docs.ixpmanager.org/grapher/mrtg/ Nick > Giorgi Kajaia > 22 May 2018 at 13:04 > Im not sure, if possible please provide link > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Josh Meyers > 22 May 2018 at 13:02 > Did you follow instructions for enabling graphs? > > Sent from my iPhone > > On May 22, 2018, at 7:58 AM, Giorgi Kajaia > wrote: > >> one more question, i have added switch now i want to display graph of >> specified port . how i can do that? in graph it shows nothing its dummy. >> >> On Tue, May 22, 2018 at 3:44 PM, Giorgi Kajaia > > wrote: >> >> Did it,, >> >> thanks guys for support :) >> >> On Tue, May 22, 2018 at 3:40 PM, Giorgi Kajaia >> > wrote: >> >> Josh, >> Version 4.7.3 >> >> On Tue, May 22, 2018 at 3:40 PM, Josh Meyers >> > wrote: >> >> What version of ixp have you installed? >> >> Sent from my iPhone >> >> On May 22, 2018, at 7:38 AM, Giorgi Kajaia >> > wrote: >> >>> Josh, >>> >>> yes Nick already told me that and from server i can do >>> snmpwalk >>> >>> On Tue, May 22, 2018 at 3:37 PM, Josh Meyers >>> > >>> wrote: >>> >>> Can your ixp manager switch ping the switch and vice >>> versa? Can you snmpwalk from the server? >>> >>> Sent from my iPhone >>> >>> On May 22, 2018, at 7:36 AM, Giorgi Kajaia >>> > >>> wrote: >>> >>>> this is my snmp config for switch : >>>> snmp-server community public RO >>>> snmp-server community private RW >>>> snmp-server user private private v1 >>>> snmp-server user private private v2c >>>> >>>> so what should i type in SNMP community filed ? i >>>> tried public, private, user, but does not work ... >>>> error type is Could not query newtelco via SNMP. >>>> Consider using thethe manual add method >>>> . >>>> >>>> >>>> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard >>>> > wrote: >>>> >>>> First, delete the switch, and use the "Add New >>>> Switch (via SNMP) " wizard to re-add the switch. >>>> >>>> https://www.example.org/ixp/switch/add-by-snmp >>>> >>>> >>>> If you put the hostname () into the >>>> Hostname field, and whatever you used for >>>> in the "SNMP Community" field, >>>> it should work fine. >>>> >>>> Don't use the "Manual / Non-SNMP Add" option. >>>> >>>> Also, as it's a cisco switch, please make sure >>>> that the SNMP community does not contain the >>>> "@" symbol. >>>> >>>> It may be helpful if you worked through the >>>> tutorial at: >>>> >>>> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manager-workshop2-installation-2018-02-25.pdf >>>> >>>> >>>> Nick >>>>> Giorgi Kajaia >>>>> 22 May 2018 at 12:21 >>>>> Yes It has returned pile of output ... >>>>> >>>>> so what could be issue of ixpmanager cannot >>>>> contact the switch ? >>>>> >>>>> >>>>> Nick Hilliard >>>>> 22 May 2018 at 12:09 >>>>> There is no cisco model 4950. Did you mean >>>>> Cisco 4948? >>>>> >>>>> Did IXP Manager print any error messages? E.g. >>>>> "Could not interpret switch system description >>>>> string"? >>>>> >>>>> Nick >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> >>>>> Nick Hilliard >>>>> 21 May 2018 at 15:47 >>>>> Hi Giorgi, >>>>> >>>>> can you to ixpmanager at inex.ie >>>>> and I'll reply to >>>>> your email from there? >>>>> >>>>> Nick >>>>> >>>>> Nick Hilliard >>>>> 21 May 2018 at 09:58 >>>>> The SNMP community on a switch is whatever you >>>>> set the value to be on the switch. The >>>>> default value on many switches is "public". >>>>> >>>>> Nick >>>>> >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> >> >> >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Giorgi Kajaia > 22 May 2018 at 12:58 > one more question, i have added switch now i want to display graph of > specified port . how i can do that? in graph it shows nothing its dummy. > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 22 May 2018 at 12:30 > First, delete the switch, and use the "Add New Switch (via SNMP) " > wizard to re-add the switch. > > https://www.example.org/ixp/switch/add-by-snmp > > If you put the hostname () into the Hostname field, and > whatever you used for in the "SNMP Community" field, > it should work fine. > > Don't use the "Manual / Non-SNMP Add" option. > > Also, as it's a cisco switch, please make sure that the SNMP community > does not contain the "@" symbol. > > It may be helpful if you worked through the tutorial at: > > https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manager-workshop2-installation-2018-02-25.pdf > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 22 May 2018 at 12:19 > "Error polling switch via SNMP" means that IXP Manager cannot contact > the switch. > > Can you run this from the command line: > > # snmpwalk -v 2c -c > > ... where "" is the community you defined on the switch > and is the IP address or hostname of the switch? > > This should return a pile of output. If it returns nothing, then snmp > is misconfigured on the switch, or the ixp manager host cannot contact > the switch. > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 13:25:42 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 16:25:42 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: <5d10f76f-460e-8cef-6e8c-ca03bc9845a2@inex.ie> References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> <5d10f76f-460e-8cef-6e8c-ca03bc9845a2@inex.ie> Message-ID: # Generate MRTG configuration and output to stdout: php artisan grapher:generate-configuration -B mrtg im trying to do this but it says In Grapher.php line 112: No graphing provider enabled (see configs/grapher.php) for mrtg when i enter in that file i can't see if its enabled or disabled. On Tue, May 22, 2018 at 4:06 PM, Nick Hilliard wrote: > https://docs.ixpmanager.org/grapher/mrtg/ > > Nick > > Giorgi Kajaia > 22 May 2018 at 13:04 > Im not sure, if possible please provide link > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Josh Meyers > 22 May 2018 at 13:02 > Did you follow instructions for enabling graphs? > > Sent from my iPhone > > On May 22, 2018, at 7:58 AM, Giorgi Kajaia wrote: > > one more question, i have added switch now i want to display graph of > specified port . how i can do that? in graph it shows nothing its dummy. > > On Tue, May 22, 2018 at 3:44 PM, Giorgi Kajaia > wrote: > >> Did it,, >> >> thanks guys for support :) >> >> On Tue, May 22, 2018 at 3:40 PM, Giorgi Kajaia >> wrote: >> >>> Josh, >>> Version 4.7.3 >>> >>> On Tue, May 22, 2018 at 3:40 PM, Josh Meyers >>> wrote: >>> >>>> What version of ixp have you installed? >>>> >>>> Sent from my iPhone >>>> >>>> On May 22, 2018, at 7:38 AM, Giorgi Kajaia wrote: >>>> >>>> Josh, >>>> >>>> yes Nick already told me that and from server i can do snmpwalk >>>> >>>> On Tue, May 22, 2018 at 3:37 PM, Josh Meyers >>>> wrote: >>>> >>>>> Can your ixp manager switch ping the switch and vice versa? Can you >>>>> snmpwalk from the server? >>>>> >>>>> Sent from my iPhone >>>>> >>>>> On May 22, 2018, at 7:36 AM, Giorgi Kajaia >>>>> wrote: >>>>> >>>>> this is my snmp config for switch : >>>>> snmp-server community public RO >>>>> snmp-server community private RW >>>>> snmp-server user private private v1 >>>>> snmp-server user private private v2c >>>>> >>>>> so what should i type in SNMP community filed ? i tried public, >>>>> private, user, but does not work ... error type is Could not query >>>>> newtelco via SNMP. Consider using the the manual add method >>>>> . >>>>> >>>>> >>>>> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard wrote: >>>>> >>>>>> First, delete the switch, and use the "Add New Switch (via SNMP) " >>>>>> wizard to re-add the switch. >>>>>> >>>>>> https://www.example.org/ixp/switch/add-by-snmp >>>>>> >>>>>> If you put the hostname () into the Hostname field, and >>>>>> whatever you used for in the "SNMP Community" field, it >>>>>> should work fine. >>>>>> >>>>>> Don't use the "Manual / Non-SNMP Add" option. >>>>>> >>>>>> Also, as it's a cisco switch, please make sure that the SNMP >>>>>> community does not contain the "@" symbol. >>>>>> >>>>>> It may be helpful if you worked through the tutorial at: >>>>>> >>>>>> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manag >>>>>> er-workshop2-installation-2018-02-25.pdf >>>>>> >>>>>> Nick >>>>>> >>>>>> Giorgi Kajaia >>>>>> 22 May 2018 at 12:21 >>>>>> Yes It has returned pile of output ... >>>>>> >>>>>> so what could be issue of ixpmanager cannot contact the switch ? >>>>>> >>>>>> >>>>>> Nick Hilliard >>>>>> 22 May 2018 at 12:09 >>>>>> There is no cisco model 4950. Did you mean Cisco 4948? >>>>>> >>>>>> Did IXP Manager print any error messages? E.g. "Could not interpret >>>>>> switch system description string"? >>>>>> >>>>>> Nick >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> INEX IXP Manager mailing list >>>>>> ixpmanager at inex.ie >>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>> Nick Hilliard >>>>>> 21 May 2018 at 15:47 >>>>>> Hi Giorgi, >>>>>> >>>>>> can you to ixpmanager at inex.ie and I'll reply to your email from >>>>>> there? >>>>>> >>>>>> Nick >>>>>> >>>>>> Nick Hilliard >>>>>> 21 May 2018 at 09:58 >>>>>> The SNMP community on a switch is whatever you set the value to be on >>>>>> the switch. The default value on many switches is "public". >>>>>> >>>>>> Nick >>>>>> >>>>>> >>>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> >>>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>>> >>> >> > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > > > > _______________________________________________ > INEX IXP Manager mailing listixpmanager at inex.iehttps://www.inex.ie/mailman/listinfo/ixpmanager > > Giorgi Kajaia > 22 May 2018 at 12:58 > one more question, i have added switch now i want to display graph of > specified port . how i can do that? in graph it shows nothing its dummy. > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 22 May 2018 at 12:30 > First, delete the switch, and use the "Add New Switch (via SNMP) " wizard > to re-add the switch. > > https://www.example.org/ixp/switch/add-by-snmp > > If you put the hostname () into the Hostname field, and whatever > you used for in the "SNMP Community" field, it should work > fine. > > Don't use the "Manual / Non-SNMP Add" option. > > Also, as it's a cisco switch, please make sure that the SNMP community > does not contain the "@" symbol. > > It may be helpful if you worked through the tutorial at: > > https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manager-workshop2- > installation-2018-02-25.pdf > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 22 May 2018 at 12:19 > "Error polling switch via SNMP" means that IXP Manager cannot contact the > switch. > > Can you run this from the command line: > > # snmpwalk -v 2c -c > > ... where "" is the community you defined on the switch and > is the IP address or hostname of the switch? > > This should return a pile of output. If it returns nothing, then snmp is > misconfigured on the switch, or the ixp manager host cannot contact the > switch. > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Tue May 22 13:32:25 2018 From: nick at inex.ie (Nick Hilliard) Date: Tue, 22 May 2018 13:32:25 +0100 Subject: [ixpmanager] Adding Switch In-Reply-To: <5d10f76f-460e-8cef-6e8c-ca03bc9845a2@inex.ie> References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> <5d10f76f-460e-8cef-6e8c-ca03bc9845a2@inex.ie> Message-ID: <4798f726-45c5-67b6-a98a-b6f7386200f6@inex.ie> You need to add the "GRAPHER_BACKEND_MRTG_DBTYPE" configuration option to your .env file. This is documented here: https://docs.ixpmanager.org/grapher/mrtg/#mrtg-setup-and-configuration Nick > Giorgi Kajaia > 22 May 2018 at 13:25 > # Generate MRTG configuration and output to stdout: > php artisan grapher:generate-configuration -B mrtg > im trying to do this but it says > In Grapher.php line 112: > > No graphing provider enabled (see configs/grapher.php) for mrtg > > when i enter in that file i can't see if its enabled or disabled. > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 22 May 2018 at 13:06 > https://docs.ixpmanager.org/grapher/mrtg/ > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Josh Meyers > 22 May 2018 at 13:02 > Did you follow instructions for enabling graphs? > > Sent from my iPhone > > On May 22, 2018, at 7:58 AM, Giorgi Kajaia > wrote: > >> one more question, i have added switch now i want to display graph of >> specified port . how i can do that? in graph it shows nothing its dummy. >> >> On Tue, May 22, 2018 at 3:44 PM, Giorgi Kajaia > > wrote: >> >> Did it,, >> >> thanks guys for support :) >> >> On Tue, May 22, 2018 at 3:40 PM, Giorgi Kajaia >> > wrote: >> >> Josh, >> Version 4.7.3 >> >> On Tue, May 22, 2018 at 3:40 PM, Josh Meyers >> > wrote: >> >> What version of ixp have you installed? >> >> Sent from my iPhone >> >> On May 22, 2018, at 7:38 AM, Giorgi Kajaia >> > wrote: >> >>> Josh, >>> >>> yes Nick already told me that and from server i can do >>> snmpwalk >>> >>> On Tue, May 22, 2018 at 3:37 PM, Josh Meyers >>> > >>> wrote: >>> >>> Can your ixp manager switch ping the switch and vice >>> versa? Can you snmpwalk from the server? >>> >>> Sent from my iPhone >>> >>> On May 22, 2018, at 7:36 AM, Giorgi Kajaia >>> > >>> wrote: >>> >>>> this is my snmp config for switch : >>>> snmp-server community public RO >>>> snmp-server community private RW >>>> snmp-server user private private v1 >>>> snmp-server user private private v2c >>>> >>>> so what should i type in SNMP community filed ? i >>>> tried public, private, user, but does not work ... >>>> error type is Could not query newtelco via SNMP. >>>> Consider using thethe manual add method >>>> . >>>> >>>> >>>> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard >>>> > wrote: >>>> >>>> First, delete the switch, and use the "Add New >>>> Switch (via SNMP) " wizard to re-add the switch. >>>> >>>> https://www.example.org/ixp/switch/add-by-snmp >>>> >>>> >>>> If you put the hostname () into the >>>> Hostname field, and whatever you used for >>>> in the "SNMP Community" field, >>>> it should work fine. >>>> >>>> Don't use the "Manual / Non-SNMP Add" option. >>>> >>>> Also, as it's a cisco switch, please make sure >>>> that the SNMP community does not contain the >>>> "@" symbol. >>>> >>>> It may be helpful if you worked through the >>>> tutorial at: >>>> >>>> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manager-workshop2-installation-2018-02-25.pdf >>>> >>>> >>>> Nick >>>>> Giorgi Kajaia >>>>> 22 May 2018 at 12:21 >>>>> Yes It has returned pile of output ... >>>>> >>>>> so what could be issue of ixpmanager cannot >>>>> contact the switch ? >>>>> >>>>> >>>>> Nick Hilliard >>>>> 22 May 2018 at 12:09 >>>>> There is no cisco model 4950. Did you mean >>>>> Cisco 4948? >>>>> >>>>> Did IXP Manager print any error messages? E.g. >>>>> "Could not interpret switch system description >>>>> string"? >>>>> >>>>> Nick >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> >>>>> Nick Hilliard >>>>> 21 May 2018 at 15:47 >>>>> Hi Giorgi, >>>>> >>>>> can you to ixpmanager at inex.ie >>>>> and I'll reply to >>>>> your email from there? >>>>> >>>>> Nick >>>>> >>>>> Nick Hilliard >>>>> 21 May 2018 at 09:58 >>>>> The SNMP community on a switch is whatever you >>>>> set the value to be on the switch. The >>>>> default value on many switches is "public". >>>>> >>>>> Nick >>>>> >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> >> >> >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Giorgi Kajaia > 22 May 2018 at 12:58 > one more question, i have added switch now i want to display graph of > specified port . how i can do that? in graph it shows nothing its dummy. > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Giorgi Kajaia > 22 May 2018 at 12:44 > Did it,, > > thanks guys for support :) > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Tue May 22 13:39:56 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 16:39:56 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: <4798f726-45c5-67b6-a98a-b6f7386200f6@inex.ie> References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> <5d10f76f-460e-8cef-6e8c-ca03bc9845a2@inex.ie> <4798f726-45c5-67b6-a98a-b6f7386200f6@inex.ie> Message-ID: I did it , but still getting same messege . -------------- next part -------------- An HTML attachment was scrubbed... URL: From barry.odonovan at inex.ie Tue May 22 13:43:14 2018 From: barry.odonovan at inex.ie (Barry O'Donovan) Date: Tue, 22 May 2018 13:43:14 +0100 Subject: [ixpmanager] Adding Switch In-Reply-To: <4798f726-45c5-67b6-a98a-b6f7386200f6@inex.ie> References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> <5d10f76f-460e-8cef-6e8c-ca03bc9845a2@inex.ie> <4798f726-45c5-67b6-a98a-b6f7386200f6@inex.ie> Message-ID: <6c89f506-dd2e-f53e-f69c-293f1cc0fd5e@inex.ie> Giorgi, please take the time to read the documentation. Specifically: https://docs.ixpmanager.org/grapher/introduction/#configuration - Barry Nick Hilliard wrote: > You need to add the "GRAPHER_BACKEND_MRTG_DBTYPE" configuration option > to your .env file. This is documented here: > > https://docs.ixpmanager.org/grapher/mrtg/#mrtg-setup-and-configuration > > Nick >> Giorgi Kajaia >> 22 May 2018 at 13:25 >> # Generate MRTG configuration and output to stdout: >> php artisan grapher:generate-configuration -B mrtg >> im trying to do this but it says >> In Grapher.php line 112: >> >> No graphing provider enabled (see configs/grapher.php) for mrtg >> >> when i enter in that file i can't see if its enabled or disabled. >> >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> Nick Hilliard >> 22 May 2018 at 13:06 >> https://docs.ixpmanager.org/grapher/mrtg/ >> >> Nick >> >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> Josh Meyers >> 22 May 2018 at 13:02 >> Did you follow instructions for enabling graphs? >> >> Sent from my iPhone >> >> On May 22, 2018, at 7:58 AM, Giorgi Kajaia > > wrote: >> >>> one more question, i have added switch now i want to display graph of >>> specified port . how i can do that? in graph it shows nothing its dummy. >>> >>> On Tue, May 22, 2018 at 3:44 PM, Giorgi Kajaia >> > wrote: >>> >>> Did it,, >>> >>> thanks guys for support :) >>> >>> On Tue, May 22, 2018 at 3:40 PM, Giorgi Kajaia >>> > wrote: >>> >>> Josh, >>> Version 4.7.3 >>> >>> On Tue, May 22, 2018 at 3:40 PM, Josh Meyers >>> > wrote: >>> >>> What version of ixp have you installed? >>> >>> Sent from my iPhone >>> >>> On May 22, 2018, at 7:38 AM, Giorgi Kajaia >>> > wrote: >>> >>>> Josh, >>>> >>>> yes Nick already told me that and from server i can do >>>> snmpwalk >>>> >>>> On Tue, May 22, 2018 at 3:37 PM, Josh Meyers >>>> > >>>> wrote: >>>> >>>> Can your ixp manager switch ping the switch and vice >>>> versa? Can you snmpwalk from the server? >>>> >>>> Sent from my iPhone >>>> >>>> On May 22, 2018, at 7:36 AM, Giorgi Kajaia >>>> > >>>> wrote: >>>> >>>>> this is my snmp config for switch : >>>>> snmp-server community public RO >>>>> snmp-server community private RW >>>>> snmp-server user private private v1 >>>>> snmp-server user private private v2c >>>>> >>>>> so what should i type in SNMP community filed ? i >>>>> tried public, private, user, but does not work ... >>>>> error type is Could not query newtelco via SNMP. >>>>> Consider using thethe manual add method >>>>> . >>>>> >>>>> >>>>> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard >>>>> > wrote: >>>>> >>>>> First, delete the switch, and use the "Add New >>>>> Switch (via SNMP) " wizard to re-add the switch. >>>>> >>>>> https://www.example.org/ixp/switch/add-by-snmp >>>>> >>>>> >>>>> If you put the hostname () into the >>>>> Hostname field, and whatever you used for >>>>> in the "SNMP Community" field, >>>>> it should work fine. >>>>> >>>>> Don't use the "Manual / Non-SNMP Add" option. >>>>> >>>>> Also, as it's a cisco switch, please make sure >>>>> that the SNMP community does not contain the >>>>> "@" symbol. >>>>> >>>>> It may be helpful if you worked through the >>>>> tutorial at: >>>>> >>>>> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manager-workshop2-installation-2018-02-25.pdf >>>>> >>>>> >>>>> Nick >>>>>> Giorgi Kajaia >>>>>> 22 May 2018 at 12:21 >>>>>> Yes It has returned pile of output ... >>>>>> >>>>>> so what could be issue of ixpmanager cannot >>>>>> contact the switch ? >>>>>> >>>>>> >>>>>> Nick Hilliard >>>>>> 22 May 2018 at 12:09 >>>>>> There is no cisco model 4950. Did you mean >>>>>> Cisco 4948? >>>>>> >>>>>> Did IXP Manager print any error messages? E.g. >>>>>> "Could not interpret switch system description >>>>>> string"? >>>>>> >>>>>> Nick >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> INEX IXP Manager mailing list >>>>>> ixpmanager at inex.ie >>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>> Nick Hilliard >>>>>> 21 May 2018 at 15:47 >>>>>> Hi Giorgi, >>>>>> >>>>>> can you to ixpmanager at inex.ie >>>>>> and I'll reply to >>>>>> your email from there? >>>>>> >>>>>> Nick >>>>>> >>>>>> Nick Hilliard >>>>>> 21 May 2018 at 09:58 >>>>>> The SNMP community on a switch is whatever you >>>>>> set the value to be on the switch. The >>>>>> default value on many switches is "public". >>>>>> >>>>>> Nick >>>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> >>> >>> >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> Giorgi Kajaia >> 22 May 2018 at 12:58 >> one more question, i have added switch now i want to display graph of >> specified port . how i can do that? in graph it shows nothing its dummy. >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> Giorgi Kajaia >> 22 May 2018 at 12:44 >> Did it,, >> >> thanks guys for support :) >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > -- Kind regards, Barry O'Donovan INEX Operations https://www.inex.ie/support/ +353 1 531 3339 From giokajana at gmail.com Tue May 22 13:50:49 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Tue, 22 May 2018 16:50:49 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: <6c89f506-dd2e-f53e-f69c-293f1cc0fd5e@inex.ie> References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> <5d10f76f-460e-8cef-6e8c-ca03bc9845a2@inex.ie> <4798f726-45c5-67b6-a98a-b6f7386200f6@inex.ie> <6c89f506-dd2e-f53e-f69c-293f1cc0fd5e@inex.ie> Message-ID: Thanks for help :) On Tue, May 22, 2018 at 4:43 PM, Barry O'Donovan wrote: > Giorgi, > > please take the time to read the documentation. > > Specifically: > > https://docs.ixpmanager.org/grapher/introduction/#configuration > > - Barry > > Nick Hilliard wrote: > >> You need to add the "GRAPHER_BACKEND_MRTG_DBTYPE" configuration option to >> your .env file. This is documented here: >> >> https://docs.ixpmanager.org/grapher/mrtg/#mrtg-setup-and-configuration >> >> Nick >> >>> Giorgi Kajaia >>> 22 May 2018 at 13:25 >>> # Generate MRTG configuration and output to stdout: >>> php artisan grapher:generate-configuration -B mrtg >>> im trying to do this but it says >>> In Grapher.php line 112: >>> >>> No graphing provider enabled (see configs/grapher.php) for mrtg >>> >>> when i enter in that file i can't see if its enabled or disabled. >>> >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> Nick Hilliard >>> 22 May 2018 at 13:06 >>> https://docs.ixpmanager.org/grapher/mrtg/ >>> >>> Nick >>> >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> Josh Meyers >>> 22 May 2018 at 13:02 >>> Did you follow instructions for enabling graphs? >>> >>> Sent from my iPhone >>> >>> On May 22, 2018, at 7:58 AM, Giorgi Kajaia >> giokajana at gmail.com>> wrote: >>> >>> one more question, i have added switch now i want to display graph of >>>> specified port . how i can do that? in graph it shows nothing its dummy. >>>> >>>> On Tue, May 22, 2018 at 3:44 PM, Giorgi Kajaia >>> > wrote: >>>> >>>> Did it,, >>>> >>>> thanks guys for support :) >>>> >>>> On Tue, May 22, 2018 at 3:40 PM, Giorgi Kajaia >>>> > wrote: >>>> >>>> Josh, >>>> Version 4.7.3 >>>> >>>> On Tue, May 22, 2018 at 3:40 PM, Josh Meyers >>>> > wrote: >>>> >>>> What version of ixp have you installed? >>>> >>>> Sent from my iPhone >>>> >>>> On May 22, 2018, at 7:38 AM, Giorgi Kajaia >>>> > wrote: >>>> >>>> Josh, >>>>> >>>>> yes Nick already told me that and from server i can do >>>>> snmpwalk >>>>> >>>>> On Tue, May 22, 2018 at 3:37 PM, Josh Meyers >>>>> > >>>>> wrote: >>>>> >>>>> Can your ixp manager switch ping the switch and vice >>>>> versa? Can you snmpwalk from the server? >>>>> >>>>> Sent from my iPhone >>>>> >>>>> On May 22, 2018, at 7:36 AM, Giorgi Kajaia >>>>> > >>>>> wrote: >>>>> >>>>> this is my snmp config for switch : >>>>>> snmp-server community public RO >>>>>> snmp-server community private RW >>>>>> snmp-server user private private v1 >>>>>> snmp-server user private private v2c >>>>>> >>>>>> so what should i type in SNMP community filed ? i >>>>>> tried public, private, user, but does not work ... >>>>>> error type is Could not query newtelco via SNMP. >>>>>> Consider using thethe manual add method >>>>>> . >>>>>> >>>>>> >>>>>> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard >>>>>> > wrote: >>>>>> >>>>>> First, delete the switch, and use the "Add New >>>>>> Switch (via SNMP) " wizard to re-add the switch. >>>>>> >>>>>> https://www.example.org/ixp/switch/add-by-snmp >>>>>> >>>>>> >>>>>> If you put the hostname () into the >>>>>> Hostname field, and whatever you used for >>>>>> in the "SNMP Community" field, >>>>>> it should work fine. >>>>>> >>>>>> Don't use the "Manual / Non-SNMP Add" option. >>>>>> >>>>>> Also, as it's a cisco switch, please make sure >>>>>> that the SNMP community does not contain the >>>>>> "@" symbol. >>>>>> >>>>>> It may be helpful if you worked through the >>>>>> tutorial at: >>>>>> >>>>>> https://www.ixpmanager.org/med >>>>>> ia/2018/inex-apricot-ixp-manager-workshop2-installation- >>>>>> 2018-02-25.pdf >>>>>> >>>>> dia/2018/inex-apricot-ixp-manager-workshop2-installation- >>>>>> 2018-02-25.pdf> >>>>>> >>>>>> Nick >>>>>> >>>>>>> Giorgi Kajaia >>>>>>> 22 May 2018 at 12:21 >>>>>>> Yes It has returned pile of output ... >>>>>>> >>>>>>> so what could be issue of ixpmanager cannot >>>>>>> contact the switch ? >>>>>>> >>>>>>> >>>>>>> Nick Hilliard >>>>>>> 22 May 2018 at 12:09 >>>>>>> There is no cisco model 4950. Did you mean >>>>>>> Cisco 4948? >>>>>>> >>>>>>> Did IXP Manager print any error messages? E.g. >>>>>>> "Could not interpret switch system description >>>>>>> string"? >>>>>>> >>>>>>> Nick >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> INEX IXP Manager mailing list >>>>>>> ixpmanager at inex.ie >>>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>>> >>>>>>> Nick Hilliard >>>>>>> 21 May 2018 at 15:47 >>>>>>> Hi Giorgi, >>>>>>> >>>>>>> can you to ixpmanager at inex.ie >>>>>>> and I'll reply to >>>>>>> your email from there? >>>>>>> >>>>>>> Nick >>>>>>> >>>>>>> Nick Hilliard >>>>>>> 21 May 2018 at 09:58 >>>>>>> The SNMP community on a switch is whatever you >>>>>>> set the value to be on the switch. The >>>>>>> default value on many switches is "public". >>>>>>> >>>>>>> Nick >>>>>>> >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> INEX IXP Manager mailing list >>>>>> ixpmanager at inex.ie >>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> Giorgi Kajaia >>> 22 May 2018 at 12:58 >>> one more question, i have added switch now i want to display graph of >>> specified port . how i can do that? in graph it shows nothing its dummy. >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> Giorgi Kajaia >>> 22 May 2018 at 12:44 >>> Did it,, >>> >>> thanks guys for support :) >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> >> >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> >> > > -- > > Kind regards, > Barry O'Donovan > INEX Operations > > https://www.inex.ie/support/ > +353 1 531 3339 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Wed May 23 08:19:30 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Wed, 23 May 2018 11:19:30 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> <5d10f76f-460e-8cef-6e8c-ca03bc9845a2@inex.ie> <4798f726-45c5-67b6-a98a-b6f7386200f6@inex.ie> <6c89f506-dd2e-f53e-f69c-293f1cc0fd5e@inex.ie> Message-ID: Hello, trying to install mrtg (same server es ixpmanager) and which installation guide should i follow? i found 2 types https://docs.ixpmanager.org/grapher/introduction/ here and On Tue, May 22, 2018 at 4:50 PM, Giorgi Kajaia wrote: > Thanks for help :) > > On Tue, May 22, 2018 at 4:43 PM, Barry O'Donovan > wrote: > >> Giorgi, >> >> please take the time to read the documentation. >> >> Specifically: >> >> https://docs.ixpmanager.org/grapher/introduction/#configuration >> >> - Barry >> >> Nick Hilliard wrote: >> >>> You need to add the "GRAPHER_BACKEND_MRTG_DBTYPE" configuration option >>> to your .env file. This is documented here: >>> >>> https://docs.ixpmanager.org/grapher/mrtg/#mrtg-setup-and-configuration >>> >>> Nick >>> >>>> Giorgi Kajaia >>>> 22 May 2018 at 13:25 >>>> # Generate MRTG configuration and output to stdout: >>>> php artisan grapher:generate-configuration -B mrtg >>>> im trying to do this but it says >>>> In Grapher.php line 112: >>>> >>>> No graphing provider enabled (see configs/grapher.php) for mrtg >>>> >>>> when i enter in that file i can't see if its enabled or disabled. >>>> >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> Nick Hilliard >>>> 22 May 2018 at 13:06 >>>> https://docs.ixpmanager.org/grapher/mrtg/ >>>> >>>> Nick >>>> >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> Josh Meyers >>>> 22 May 2018 at 13:02 >>>> Did you follow instructions for enabling graphs? >>>> >>>> Sent from my iPhone >>>> >>>> On May 22, 2018, at 7:58 AM, Giorgi Kajaia >>> > wrote: >>>> >>>> one more question, i have added switch now i want to display graph of >>>>> specified port . how i can do that? in graph it shows nothing its dummy. >>>>> >>>>> On Tue, May 22, 2018 at 3:44 PM, Giorgi Kajaia >>>> > wrote: >>>>> >>>>> Did it,, >>>>> >>>>> thanks guys for support :) >>>>> >>>>> On Tue, May 22, 2018 at 3:40 PM, Giorgi Kajaia >>>>> > wrote: >>>>> >>>>> Josh, >>>>> Version 4.7.3 >>>>> >>>>> On Tue, May 22, 2018 at 3:40 PM, Josh Meyers >>>>> > wrote: >>>>> >>>>> What version of ixp have you installed? >>>>> >>>>> Sent from my iPhone >>>>> >>>>> On May 22, 2018, at 7:38 AM, Giorgi Kajaia >>>>> > wrote: >>>>> >>>>> Josh, >>>>>> >>>>>> yes Nick already told me that and from server i can do >>>>>> snmpwalk >>>>>> >>>>>> On Tue, May 22, 2018 at 3:37 PM, Josh Meyers >>>>>> > >>>>>> wrote: >>>>>> >>>>>> Can your ixp manager switch ping the switch and vice >>>>>> versa? Can you snmpwalk from the server? >>>>>> >>>>>> Sent from my iPhone >>>>>> >>>>>> On May 22, 2018, at 7:36 AM, Giorgi Kajaia >>>>>> > >>>>>> wrote: >>>>>> >>>>>> this is my snmp config for switch : >>>>>>> snmp-server community public RO >>>>>>> snmp-server community private RW >>>>>>> snmp-server user private private v1 >>>>>>> snmp-server user private private v2c >>>>>>> >>>>>>> so what should i type in SNMP community filed ? i >>>>>>> tried public, private, user, but does not work ... >>>>>>> error type is Could not query newtelco via SNMP. >>>>>>> Consider using thethe manual add method >>>>>>> . >>>>>>> >>>>>>> >>>>>>> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard >>>>>>> > wrote: >>>>>>> >>>>>>> First, delete the switch, and use the "Add New >>>>>>> Switch (via SNMP) " wizard to re-add the switch. >>>>>>> >>>>>>> https://www.example.org/ixp/switch/add-by-snmp >>>>>>> >>>>>>> >>>>>>> If you put the hostname () into the >>>>>>> Hostname field, and whatever you used for >>>>>>> in the "SNMP Community" field, >>>>>>> it should work fine. >>>>>>> >>>>>>> Don't use the "Manual / Non-SNMP Add" option. >>>>>>> >>>>>>> Also, as it's a cisco switch, please make sure >>>>>>> that the SNMP community does not contain the >>>>>>> "@" symbol. >>>>>>> >>>>>>> It may be helpful if you worked through the >>>>>>> tutorial at: >>>>>>> >>>>>>> https://www.ixpmanager.org/med >>>>>>> ia/2018/inex-apricot-ixp-manager-workshop2-installation-2018 >>>>>>> -02-25.pdf >>>>>>> >>>>>> dia/2018/inex-apricot-ixp-manager-workshop2-installation-201 >>>>>>> 8-02-25.pdf> >>>>>>> >>>>>>> Nick >>>>>>> >>>>>>>> Giorgi Kajaia >>>>>>>> 22 May 2018 at 12:21 >>>>>>>> Yes It has returned pile of output ... >>>>>>>> >>>>>>>> so what could be issue of ixpmanager cannot >>>>>>>> contact the switch ? >>>>>>>> >>>>>>>> >>>>>>>> Nick Hilliard >>>>>>>> 22 May 2018 at 12:09 >>>>>>>> There is no cisco model 4950. Did you mean >>>>>>>> Cisco 4948? >>>>>>>> >>>>>>>> Did IXP Manager print any error messages? E.g. >>>>>>>> "Could not interpret switch system description >>>>>>>> string"? >>>>>>>> >>>>>>>> Nick >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> INEX IXP Manager mailing list >>>>>>>> ixpmanager at inex.ie >>>>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>>>> >>>>>>>> Nick Hilliard >>>>>>>> 21 May 2018 at 15:47 >>>>>>>> Hi Giorgi, >>>>>>>> >>>>>>>> can you to ixpmanager at inex.ie >>>>>>>> and I'll reply to >>>>>>>> your email from there? >>>>>>>> >>>>>>>> Nick >>>>>>>> >>>>>>>> Nick Hilliard >>>>>>>> 21 May 2018 at 09:58 >>>>>>>> The SNMP community on a switch is whatever you >>>>>>>> set the value to be on the switch. The >>>>>>>> default value on many switches is "public". >>>>>>>> >>>>>>>> Nick >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> INEX IXP Manager mailing list >>>>>>> ixpmanager at inex.ie >>>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>>> >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> INEX IXP Manager mailing list >>>>>> ixpmanager at inex.ie >>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> INEX IXP Manager mailing list >>>>>> ixpmanager at inex.ie >>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> Giorgi Kajaia >>>> 22 May 2018 at 12:58 >>>> one more question, i have added switch now i want to display graph of >>>> specified port . how i can do that? in graph it shows nothing its dummy. >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> Giorgi Kajaia >>>> 22 May 2018 at 12:44 >>>> Did it,, >>>> >>>> thanks guys for support :) >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>> >>> >>> >>> _______________________________________________ >>> INEX IXP Manager mailing list >>> ixpmanager at inex.ie >>> https://www.inex.ie/mailman/listinfo/ixpmanager >>> >>> >> >> -- >> >> Kind regards, >> Barry O'Donovan >> INEX Operations >> >> https://www.inex.ie/support/ >> +353 1 531 3339 >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Wed May 23 08:19:58 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Wed, 23 May 2018 11:19:58 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <79da332f-3d21-d95d-2f44-27bb22cd879f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> <5d10f76f-460e-8cef-6e8c-ca03bc9845a2@inex.ie> <4798f726-45c5-67b6-a98a-b6f7386200f6@inex.ie> <6c89f506-dd2e-f53e-f69c-293f1cc0fd5e@inex.ie> Message-ID: https://docs.ixpmanager.org/grapher/mrtg/ also here and which one should i follow? On Wed, May 23, 2018 at 11:19 AM, Giorgi Kajaia wrote: > Hello, > > trying to install mrtg (same server es ixpmanager) and which installation > guide should i follow? i found 2 types > > https://docs.ixpmanager.org/grapher/introduction/ here and > > On Tue, May 22, 2018 at 4:50 PM, Giorgi Kajaia > wrote: > >> Thanks for help :) >> >> On Tue, May 22, 2018 at 4:43 PM, Barry O'Donovan >> wrote: >> >>> Giorgi, >>> >>> please take the time to read the documentation. >>> >>> Specifically: >>> >>> https://docs.ixpmanager.org/grapher/introduction/#configuration >>> >>> - Barry >>> >>> Nick Hilliard wrote: >>> >>>> You need to add the "GRAPHER_BACKEND_MRTG_DBTYPE" configuration option >>>> to your .env file. This is documented here: >>>> >>>> https://docs.ixpmanager.org/grapher/mrtg/#mrtg-setup-and-configuration >>>> >>>> Nick >>>> >>>>> Giorgi Kajaia >>>>> 22 May 2018 at 13:25 >>>>> # Generate MRTG configuration and output to stdout: >>>>> php artisan grapher:generate-configuration -B mrtg >>>>> im trying to do this but it says >>>>> In Grapher.php line 112: >>>>> >>>>> No graphing provider enabled (see configs/grapher.php) for mrtg >>>>> >>>>> when i enter in that file i can't see if its enabled or disabled. >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> Nick Hilliard >>>>> 22 May 2018 at 13:06 >>>>> https://docs.ixpmanager.org/grapher/mrtg/ >>>>> >>>>> Nick >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> Josh Meyers >>>>> 22 May 2018 at 13:02 >>>>> Did you follow instructions for enabling graphs? >>>>> >>>>> Sent from my iPhone >>>>> >>>>> On May 22, 2018, at 7:58 AM, Giorgi Kajaia >>>> > wrote: >>>>> >>>>> one more question, i have added switch now i want to display graph of >>>>>> specified port . how i can do that? in graph it shows nothing its dummy. >>>>>> >>>>>> On Tue, May 22, 2018 at 3:44 PM, Giorgi Kajaia >>>>> > wrote: >>>>>> >>>>>> Did it,, >>>>>> >>>>>> thanks guys for support :) >>>>>> >>>>>> On Tue, May 22, 2018 at 3:40 PM, Giorgi Kajaia >>>>>> > wrote: >>>>>> >>>>>> Josh, >>>>>> Version 4.7.3 >>>>>> >>>>>> On Tue, May 22, 2018 at 3:40 PM, Josh Meyers >>>>>> > wrote: >>>>>> >>>>>> What version of ixp have you installed? >>>>>> >>>>>> Sent from my iPhone >>>>>> >>>>>> On May 22, 2018, at 7:38 AM, Giorgi Kajaia >>>>>> > wrote: >>>>>> >>>>>> Josh, >>>>>>> >>>>>>> yes Nick already told me that and from server i can do >>>>>>> snmpwalk >>>>>>> >>>>>>> On Tue, May 22, 2018 at 3:37 PM, Josh Meyers >>>>>>> > >>>>>>> wrote: >>>>>>> >>>>>>> Can your ixp manager switch ping the switch and vice >>>>>>> versa? Can you snmpwalk from the server? >>>>>>> >>>>>>> Sent from my iPhone >>>>>>> >>>>>>> On May 22, 2018, at 7:36 AM, Giorgi Kajaia >>>>>>> > >>>>>>> wrote: >>>>>>> >>>>>>> this is my snmp config for switch : >>>>>>>> snmp-server community public RO >>>>>>>> snmp-server community private RW >>>>>>>> snmp-server user private private v1 >>>>>>>> snmp-server user private private v2c >>>>>>>> >>>>>>>> so what should i type in SNMP community filed ? i >>>>>>>> tried public, private, user, but does not work ... >>>>>>>> error type is Could not query newtelco via SNMP. >>>>>>>> Consider using thethe manual add method >>>>>>>> . >>>>>>>> >>>>>>>> >>>>>>>> On Tue, May 22, 2018 at 3:30 PM, Nick Hilliard >>>>>>>> > wrote: >>>>>>>> >>>>>>>> First, delete the switch, and use the "Add New >>>>>>>> Switch (via SNMP) " wizard to re-add the switch. >>>>>>>> >>>>>>>> https://www.example.org/ixp/switch/add-by-snmp >>>>>>>> >>>>>>> > >>>>>>>> >>>>>>>> If you put the hostname () into the >>>>>>>> Hostname field, and whatever you used for >>>>>>>> in the "SNMP Community" field, >>>>>>>> it should work fine. >>>>>>>> >>>>>>>> Don't use the "Manual / Non-SNMP Add" option. >>>>>>>> >>>>>>>> Also, as it's a cisco switch, please make sure >>>>>>>> that the SNMP community does not contain the >>>>>>>> "@" symbol. >>>>>>>> >>>>>>>> It may be helpful if you worked through the >>>>>>>> tutorial at: >>>>>>>> >>>>>>>> https://www.ixpmanager.org/med >>>>>>>> ia/2018/inex-apricot-ixp-manager-workshop2-installation-2018 >>>>>>>> -02-25.pdf >>>>>>>> >>>>>>> dia/2018/inex-apricot-ixp-manager-workshop2-installation-201 >>>>>>>> 8-02-25.pdf> >>>>>>>> >>>>>>>> Nick >>>>>>>> >>>>>>>>> Giorgi Kajaia >>>>>>>>> 22 May 2018 at 12:21 >>>>>>>>> Yes It has returned pile of output ... >>>>>>>>> >>>>>>>>> so what could be issue of ixpmanager cannot >>>>>>>>> contact the switch ? >>>>>>>>> >>>>>>>>> >>>>>>>>> Nick Hilliard >>>>>>>>> 22 May 2018 at 12:09 >>>>>>>>> There is no cisco model 4950. Did you mean >>>>>>>>> Cisco 4948? >>>>>>>>> >>>>>>>>> Did IXP Manager print any error messages? E.g. >>>>>>>>> "Could not interpret switch system description >>>>>>>>> string"? >>>>>>>>> >>>>>>>>> Nick >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ______________________________ >>>>>>>>> _________________ >>>>>>>>> INEX IXP Manager mailing list >>>>>>>>> ixpmanager at inex.ie >>>>>>>>> https://www.inex.ie/mailman/li >>>>>>>>> stinfo/ixpmanager >>>>>>>> > >>>>>>>>> Nick Hilliard >>>>>>>>> 21 May 2018 at 15:47 >>>>>>>>> Hi Giorgi, >>>>>>>>> >>>>>>>>> can you to ixpmanager at inex.ie >>>>>>>>> and I'll reply to >>>>>>>>> your email from there? >>>>>>>>> >>>>>>>>> Nick >>>>>>>>> >>>>>>>>> Nick Hilliard >>>>>>>>> 21 May 2018 at 09:58 >>>>>>>>> The SNMP community on a switch is whatever you >>>>>>>>> set the value to be on the switch. The >>>>>>>>> default value on many switches is "public". >>>>>>>>> >>>>>>>>> Nick >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> INEX IXP Manager mailing list >>>>>>>> ixpmanager at inex.ie >>>>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> INEX IXP Manager mailing list >>>>>>> ixpmanager at inex.ie >>>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> INEX IXP Manager mailing list >>>>>>> ixpmanager at inex.ie >>>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>>> >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> INEX IXP Manager mailing list >>>>>> ixpmanager at inex.ie >>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> INEX IXP Manager mailing list >>>>>> ixpmanager at inex.ie >>>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> Giorgi Kajaia >>>>> 22 May 2018 at 12:58 >>>>> one more question, i have added switch now i want to display graph of >>>>> specified port . how i can do that? in graph it shows nothing its dummy. >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> Giorgi Kajaia >>>>> 22 May 2018 at 12:44 >>>>> Did it,, >>>>> >>>>> thanks guys for support :) >>>>> >>>>> >>>>> _______________________________________________ >>>>> INEX IXP Manager mailing list >>>>> ixpmanager at inex.ie >>>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> INEX IXP Manager mailing list >>>> ixpmanager at inex.ie >>>> https://www.inex.ie/mailman/listinfo/ixpmanager >>>> >>>> >>> >>> -- >>> >>> Kind regards, >>> Barry O'Donovan >>> INEX Operations >>> >>> https://www.inex.ie/support/ >>> +353 1 531 3339 >>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Wed May 23 09:48:42 2018 From: nick at inex.ie (Nick Hilliard) Date: Wed, 23 May 2018 09:48:42 +0100 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> <5d10f76f-460e-8cef-6e8c-ca03bc9845a2@inex.ie> <4798f726-45c5-67b6-a98a-b6f7386200f6@inex.ie> <6c89f506-dd2e-f53e-f69c-293f1cc0fd5e@inex.ie> Message-ID: <0b523c9e-f242-dd2b-b13b-f87e42dfa24f@inex.ie> you should use the /grapher/mrtg/ installation guide. Nick > Giorgi Kajaia > 23 May 2018 at 08:19 > https://docs.ixpmanager.org/grapher/mrtg/ also here and which one > should i follow? > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Giorgi Kajaia > 23 May 2018 at 08:19 > Hello, > > trying to install mrtg (same server es ixpmanager) and which > installation guide should i follow? i found 2 types > > https://docs.ixpmanager.org/grapher/introduction/ here and > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 22 May 2018 at 13:32 > You need to add the "GRAPHER_BACKEND_MRTG_DBTYPE" configuration option > to your .env file. This is documented here: > > https://docs.ixpmanager.org/grapher/mrtg/#mrtg-setup-and-configuration > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 22 May 2018 at 13:06 > https://docs.ixpmanager.org/grapher/mrtg/ > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > Nick Hilliard > 22 May 2018 at 12:30 > First, delete the switch, and use the "Add New Switch (via SNMP) " > wizard to re-add the switch. > > https://www.example.org/ixp/switch/add-by-snmp > > If you put the hostname () into the Hostname field, and > whatever you used for in the "SNMP Community" field, > it should work fine. > > Don't use the "Manual / Non-SNMP Add" option. > > Also, as it's a cisco switch, please make sure that the SNMP community > does not contain the "@" symbol. > > It may be helpful if you worked through the tutorial at: > > https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manager-workshop2-installation-2018-02-25.pdf > > Nick > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager -------------- next part -------------- An HTML attachment was scrubbed... URL: From zeeshan_aziz01 at rocketmail.com Wed May 23 07:37:54 2018 From: zeeshan_aziz01 at rocketmail.com (Zeeshan Aziz) Date: Wed, 23 May 2018 06:37:54 +0000 (UTC) Subject: [ixpmanager] Integration of Faucet SDN Controller in IXP Manager Issue. References: <639099969.187062.1527057474227.ref@mail.yahoo.com> Message-ID: <639099969.187062.1527057474227@mail.yahoo.com> Hi! Hope you are fine. I have been working on the integration of Faucet SDN Controller with IXP Manager. Until now I have done the following things: 1.? Added a Tab named Controller??on the IXP-Manager Dashboard.2.? Created Views of Controller including Form for controller addition with specific controller fields.3.? Created?controller table in the database with the fields using php artisan migration commands successfully. But this resulted in errors and not working properly as I have seen there are other mapping files xml specifically that needs to be generated for the controller table. I have seen it is using doctrine orm.4.? Then I have installed laravel-doctrine/migrations?package as it is missing in order to create the controller table doctrine migration commands. The package installed correctly. I have created controller entity class in database/Entities folder. I tried to run the doctrine migrations though php artisan cli using these commands: sudo php artisan doctrine:migrations:diff (Run successfully) sudo php artisan doctrine:migrations:migrate (Unable to run it successfully getting error whose screenshot is attached below). At this stage I have two questions: Q1: I wanted to know if I am going in the right direction or not?Q2:?If not then let me know the way how to add controller table in the database in order to make it work with the view.?Your help in this regard will be highly appreciated. Thanking you in anticipation. Regards:Engr, Zeeshan AzizMSEE-22?MCS, NUST,?Pakistan. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Error on running doctrine migrations command.png Type: image/png Size: 18686 bytes Desc: not available URL: From giokajana at gmail.com Wed May 23 13:56:49 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Wed, 23 May 2018 16:56:49 +0400 Subject: [ixpmanager] Adding Switch In-Reply-To: References: <8846073c-de8c-e2c9-e851-aa540800d54f@inex.ie> <1a84917b-923f-1a6b-10ec-c477df286c53@inex.ie> <7CB885CC-BB20-48BE-803E-466CCC56DC20@webbytech.net> <6A623E9F-2FC3-45E2-AFCD-74EABCC287A6@webbytech.net> <5d10f76f-460e-8cef-6e8c-ca03bc9845a2@inex.ie> <4798f726-45c5-67b6-a98a-b6f7386200f6@inex.ie> <6c89f506-dd2e-f53e-f69c-293f1cc0fd5e@inex.ie> <0b523c9e-f242-dd2b-b13b-f87e42dfa24f@inex.ie> Message-ID: Thanks, but server can't start mrtg cp ${IXPROOT}/tools/runtime/mrtg/ubuntu-mrtg-initd /etc/init.d/mrtg chmod +x /etc/init.d/mrtg update-rc.d mrtg defaults /etc/init.d/mrtg start when i type last line /etc/init.dmrtg start it says failed. and on web page i can see blank pages in graphs. any fix for this? On Wed, May 23, 2018 at 4:56 PM, Giorgi Kajaia wrote: > Thanks, but server can't start mrtg > > cp ${IXPROOT}/tools/runtime/mrtg/ubuntu-mrtg-initd /etc/init.d/mrtg > chmod +x /etc/init.d/mrtg > update-rc.d mrtg defaults > /etc/init.d/mrtg start > > when i type last line /etc/init.dmrtg start it says failed. and on web page i can see blank pages in graphs. any fix for this? > > > On Wed, May 23, 2018 at 12:48 PM, Nick Hilliard wrote: > >> you should use the /grapher/mrtg/ installation guide. >> >> Nick >> >> Giorgi Kajaia >> 23 May 2018 at 08:19 >> https://docs.ixpmanager.org/grapher/mrtg/ also here and which one should >> i follow? >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> Giorgi Kajaia >> 23 May 2018 at 08:19 >> Hello, >> >> trying to install mrtg (same server es ixpmanager) and which installation >> guide should i follow? i found 2 types >> >> https://docs.ixpmanager.org/grapher/introduction/ here and >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> Nick Hilliard >> 22 May 2018 at 13:32 >> You need to add the "GRAPHER_BACKEND_MRTG_DBTYPE" configuration option to >> your .env file. This is documented here: >> >> https://docs.ixpmanager.org/grapher/mrtg/#mrtg-setup-and-configuration >> >> Nick >> >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> Nick Hilliard >> 22 May 2018 at 13:06 >> https://docs.ixpmanager.org/grapher/mrtg/ >> >> Nick >> >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> Nick Hilliard >> 22 May 2018 at 12:30 >> First, delete the switch, and use the "Add New Switch (via SNMP) " wizard >> to re-add the switch. >> >> https://www.example.org/ixp/switch/add-by-snmp >> >> If you put the hostname () into the Hostname field, and whatever >> you used for in the "SNMP Community" field, it should work >> fine. >> >> Don't use the "Manual / Non-SNMP Add" option. >> >> Also, as it's a cisco switch, please make sure that the SNMP community >> does not contain the "@" symbol. >> >> It may be helpful if you worked through the tutorial at: >> >> https://www.ixpmanager.org/media/2018/inex-apricot-ixp-manag >> er-workshop2-installation-2018-02-25.pdf >> >> Nick >> >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> https://www.inex.ie/mailman/listinfo/ixpmanager >> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Thu May 24 08:28:30 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Thu, 24 May 2018 11:28:30 +0400 Subject: [ixpmanager] MRTG Message-ID: Hello, Im trying to configure MRTG Grapher In my .env file it looks like this: GRAPHER_BACKENDS="mrtg" GRAPHER_BACKEND_MRTG_DBTYPE="rrd" GRAPHER_BACKEND_MRTG_WORKDIR="/srv/mrtg" GRAPHER_BACKEND_MRTG_LOGDIR="/srv/mrtg" GRAPHER_CACHE_ENABLED=true also php artisan grapher:generate-configuration -B mrtg php artisan grapher:gerenate-configuraton -B mrtg -O /tmp/cfg/mrtg.cfg.candidate they work too But i see on web page i see blank pages for graph and when i try to type command /etc/init.d/mrtg start it gives FAILED and with systemctl status mrtg.service it gives me output : May 24 11:27:27 root systemd[1]: Starting LSB: mrtg init script... May 24 11:27:27 root mrtg[12836]: * Starting mrtg May 24 11:27:27 root mrtg[12836]: cannot write to /etc/mrtg/mrtg.pid: No such file or directory May 24 11:27:27 root mrtg[12836]: ERROR: unable to open config file: /etc/mrtg/mrtg.cfg May 24 11:27:27 root systemd[1]: mrtg.service: Control process exited, code=exited status=2 May 24 11:27:27 root systemd[1]: Failed to start LSB: mrtg init script. May 24 11:27:27 root systemd[1]: mrtg.service: Unit entered failed state. May 24 11:27:27 root systemd[1]: mrtg.service: Failed with result 'exit-code'. Please Help . -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Thu May 24 10:49:27 2018 From: nick at inex.ie (Nick Hilliard) Date: Thu, 24 May 2018 10:49:27 +0100 Subject: [ixpmanager] MRTG In-Reply-To: References: Message-ID: <18759000-b3ab-666e-0efa-05e0a968c856@inex.ie> Giorgi Kajaia wrote: > also php artisan grapher:generate-configuration -B mrtg > php artisan grapher:gerenate-configuraton -B mrtg -O > /tmp/cfg/mrtg.cfg.candidate they work too > But i see on web page i see blank pages for graph and when i try to type > command > /etc/init.d/mrtg start it gives FAILED > and with systemctl status mrtg.service it gives me output : > > > May 24 11:27:27 root systemd[1]: Starting LSB: mrtg init script... > May 24 11:27:27 root mrtg[12836]: * Starting mrtg > May 24 11:27:27 root mrtg[12836]: cannot write to /etc/mrtg/mrtg.pid: No > such file or directory > May 24 11:27:27 root mrtg[12836]: ERROR: unable to open config file: > /etc/mrtg/mrtg.cfg You need to make sure that the mrtg.cfg file which is generated by grapher:generate-configuration is moved to /etc/mrtg/mrtg.cfg. Nick From giokajana at gmail.com Thu May 24 10:56:05 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Thu, 24 May 2018 13:56:05 +0400 Subject: [ixpmanager] MRTG In-Reply-To: <18759000-b3ab-666e-0efa-05e0a968c856@inex.ie> References: <18759000-b3ab-666e-0efa-05e0a968c856@inex.ie> Message-ID: i have moved it was in /etc/mrtg.cfg and i moved to /etc/mrtg/mrtg.cfg but still cant start mrtg it displays another output now May 24 13:53:07 root systemd[1]: Starting LSB: mrtg init script... May 24 13:53:07 root mrtg[13929]: * Starting mrtg May 24 13:53:07 root mrtg[13929]: ERROR: CFG Error in "workdir", file /etc/mrtg/mrtg.cfg line 8: Working May 24 13:53:07 root systemd[1]: mrtg.service: Control process exited, code=exited status=2 May 24 13:53:07 root systemd[1]: Failed to start LSB: mrtg init script. May 24 13:53:07 root systemd[1]: mrtg.service: Unit entered failed state. May 24 13:53:07 root systemd[1]: mrtg.service: Failed with result 'exit-code'. Any help for this? Thanks in advance. On Thu, May 24, 2018 at 1:49 PM, Nick Hilliard wrote: > Giorgi Kajaia wrote: > >> also php artisan grapher:generate-configuration -B mrtg >> php artisan grapher:gerenate-configuraton -B mrtg -O >> /tmp/cfg/mrtg.cfg.candidate they work too >> But i see on web page i see blank pages for graph and when i try to type >> command >> /etc/init.d/mrtg start it gives FAILED >> and with systemctl status mrtg.service it gives me output : >> >> >> May 24 11:27:27 root systemd[1]: Starting LSB: mrtg init script... >> May 24 11:27:27 root mrtg[12836]: * Starting mrtg >> May 24 11:27:27 root mrtg[12836]: cannot write to /etc/mrtg/mrtg.pid: No >> such file or directory >> May 24 11:27:27 root mrtg[12836]: ERROR: unable to open config file: >> /etc/mrtg/mrtg.cfg >> > > You need to make sure that the mrtg.cfg file which is generated by > grapher:generate-configuration is moved to /etc/mrtg/mrtg.cfg. > > Nick > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Thu May 24 11:05:51 2018 From: nick at inex.ie (Nick Hilliard) Date: Thu, 24 May 2018 11:05:51 +0100 Subject: [ixpmanager] MRTG In-Reply-To: References: <18759000-b3ab-666e-0efa-05e0a968c856@inex.ie> Message-ID: <835d47eb-8796-f5ac-4ea9-4716f452aa93@inex.ie> Giorgi Kajaia wrote: > May 24 13:53:07 root mrtg[13929]: * Starting mrtg > May 24 13:53:07 root mrtg[13929]: ERROR: CFG Error in "workdir", file > /etc/mrtg/mrtg.cfg line 8: Working > May 24 13:53:07 root systemd[1]: mrtg.service: Control process exited, > code=exited status=2 systemd is truncating the full error text from mrtg, but the full error in this situation is: "Working directory XXXXXX does not exist". This means that you've specified a directory in your .env file for MRTG which doesn't exist. If you execute the following, it will show you what the problem is: # mrtg /etc/mrtg/mrtg.cfg Nick From giokajana at gmail.com Thu May 24 11:11:47 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Thu, 24 May 2018 14:11:47 +0400 Subject: [ixpmanager] MRTG In-Reply-To: References: <18759000-b3ab-666e-0efa-05e0a968c856@inex.ie> <835d47eb-8796-f5ac-4ea9-4716f452aa93@inex.ie> Message-ID: ERROR: Mrtg will most likely not work properly when the environment variable LANG is set to UTF-8. Please run mrtg in an environment where this is not the case. Try the following command to start: env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg This is outpout when i tried to enter this command env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg then it displayed this output: ERROR: CFG Error in "workdir", file /etc/mrtg/mrtg.cfg line 8: Working directory /var/www/mrtg does not exist so what i must do ? i think i must change that workdir directory but from where? On Thu, May 24, 2018 at 2:10 PM, Giorgi Kajaia wrote: > ERROR: Mrtg will most likely not work properly when the environment > variable LANG is set to UTF-8. Please run mrtg in an environment > where this is not the case. Try the following command to start: > > env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg > This is outpout when i tried to enter this command env LANG=C > /usr/bin/mrtg /etc/mrtg/mrtg.cfg > then it displayed this output: ERROR: CFG Error in "workdir", file > /etc/mrtg/mrtg.cfg line 8: Working directory /var/www/mrtg does not exist > > so what i must do ? i think i must change that workdir directory but from > where? > > > > On Thu, May 24, 2018 at 2:05 PM, Nick Hilliard wrote: > >> Giorgi Kajaia wrote: >> >>> May 24 13:53:07 root mrtg[13929]: * Starting mrtg >>> May 24 13:53:07 root mrtg[13929]: ERROR: CFG Error in "workdir", file >>> /etc/mrtg/mrtg.cfg line 8: Working >>> May 24 13:53:07 root systemd[1]: mrtg.service: Control process exited, >>> code=exited status=2 >>> >> >> systemd is truncating the full error text from mrtg, but the full error >> in this situation is: "Working directory XXXXXX does not exist". >> >> This means that you've specified a directory in your .env file for MRTG >> which doesn't exist. >> >> If you execute the following, it will show you what the problem is: >> >> # mrtg /etc/mrtg/mrtg.cfg >> >> Nick >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From giokajana at gmail.com Thu May 24 11:14:11 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Thu, 24 May 2018 14:14:11 +0400 Subject: [ixpmanager] MRTG In-Reply-To: References: <18759000-b3ab-666e-0efa-05e0a968c856@inex.ie> <835d47eb-8796-f5ac-4ea9-4716f452aa93@inex.ie> Message-ID: I have changed with vim /etc/mrtg/mrtg.cfg workdir directory to /srv/mrtg and mrtg started but on website i see Blank images on traffic . any fix ? On Thu, May 24, 2018 at 2:11 PM, Giorgi Kajaia wrote: > ERROR: Mrtg will most likely not work properly when the environment > variable LANG is set to UTF-8. Please run mrtg in an environment > where this is not the case. Try the following command to start: > > env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg > This is outpout when i tried to enter this command env LANG=C > /usr/bin/mrtg /etc/mrtg/mrtg.cfg > then it displayed this output: ERROR: CFG Error in "workdir", file > /etc/mrtg/mrtg.cfg line 8: Working directory /var/www/mrtg does not exist > > so what i must do ? i think i must change that workdir directory but from > where? > > > > > On Thu, May 24, 2018 at 2:10 PM, Giorgi Kajaia > wrote: > >> ERROR: Mrtg will most likely not work properly when the environment >> variable LANG is set to UTF-8. Please run mrtg in an environment >> where this is not the case. Try the following command to start: >> >> env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg >> This is outpout when i tried to enter this command env LANG=C >> /usr/bin/mrtg /etc/mrtg/mrtg.cfg >> then it displayed this output: ERROR: CFG Error in "workdir", file >> /etc/mrtg/mrtg.cfg line 8: Working directory /var/www/mrtg does not exist >> >> so what i must do ? i think i must change that workdir directory but from >> where? >> >> >> >> On Thu, May 24, 2018 at 2:05 PM, Nick Hilliard wrote: >> >>> Giorgi Kajaia wrote: >>> >>>> May 24 13:53:07 root mrtg[13929]: * Starting mrtg >>>> May 24 13:53:07 root mrtg[13929]: ERROR: CFG Error in "workdir", file >>>> /etc/mrtg/mrtg.cfg line 8: Working >>>> May 24 13:53:07 root systemd[1]: mrtg.service: Control process exited, >>>> code=exited status=2 >>>> >>> >>> systemd is truncating the full error text from mrtg, but the full error >>> in this situation is: "Working directory XXXXXX does not exist". >>> >>> This means that you've specified a directory in your .env file for MRTG >>> which doesn't exist. >>> >>> If you execute the following, it will show you what the problem is: >>> >>> # mrtg /etc/mrtg/mrtg.cfg >>> >>> Nick >>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From barry.odonovan at inex.ie Thu May 24 13:05:14 2018 From: barry.odonovan at inex.ie (Barry O'Donovan) Date: Thu, 24 May 2018 13:05:14 +0100 Subject: [ixpmanager] Integration of Faucet SDN Controller in IXP Manager Issue. In-Reply-To: <639099969.187062.1527057474227@mail.yahoo.com> References: <639099969.187062.1527057474227.ref@mail.yahoo.com> <639099969.187062.1527057474227@mail.yahoo.com> Message-ID: <1c760c71-edd4-d326-d4b6-22989943bb23@inex.ie> For the benefit of the list, we have followed this up directly with Zeeshan and his colleagues as we've had on going discussions around this. Development wise, we mentioned that one of the advantages of switching from Zend Framework to Laravel has been the ability to have add on functionality by way of packages: https://laravel.com/docs/5.6/packages We think this is a perfect way to add FAUCET support and we can help ensuring UI hooks by detecting the packet and adding menu options. - Barry Zeeshan Aziz wrote: > Hi! > > Hope you are fine. I have been working on the integration of Faucet SDN > Controller with IXP Manager. Until now I have done the following things: > > *1.* Added a Tab named *Controller * on the IXP-Manager Dashboard. > *2.* Created *Views* of Controller including *Form *for controller > addition with specific controller fields. > *3.* Created *controller table* in the database with the fields using > php artisan migration commands successfully. But this resulted in errors > and not working properly as I have seen there are other mapping files > *xml* specifically that needs to be generated for the controller table. > I have seen it is using *doctrine orm*. > *4.* Then I have installed *laravel-doctrine/migrations* package as it > is missing in order to create the *controller table *doctrine migration > commands. The package installed correctly. I have *created controller > entity* class in *database/Entities* folder. I tried to run the doctrine > migrations though php artisan cli using these commands: > > *sudo php artisan doctrine:migrations:diff (*Run successfully*)* > *sudo php artisan doctrine:migrations:migrate (*Unable to run it > successfully getting error whose *screenshot* is attached below*).* > * > * > At this stage I have two questions: > > *Q1:* I wanted to know if I am going in the right direction or not? > *Q2:* If not then let me know the way how to add *controller table* in > the database in order to make it work with the view. > Your help in this regard will be highly appreciated. Thanking you in > anticipation. > > Regards: > Engr, Zeeshan Aziz > MSEE-22 > MCS, NUST, > Pakistan. > * > * > > > * > * > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > https://www.inex.ie/mailman/listinfo/ixpmanager > -- Kind regards, Barry O'Donovan INEX Operations https://www.inex.ie/support/ +353 1 531 3339 From nick at inex.ie Thu May 24 15:11:04 2018 From: nick at inex.ie (Nick Hilliard) Date: Thu, 24 May 2018 15:11:04 +0100 Subject: [ixpmanager] INEX privacy policy and GDPR Message-ID: <4c5b9de1-c41a-8626-a157-f5ebcc4d6bc9@inex.ie> As GDPR updates are all the rage, we'd like to bring your attention to INEX's privacy policy: https://www.inex.ie/privacy/ This covers personal data held by INEX, and is applicable to all INEX's activities. Updates to this policy will be posted on the INEX web site. Nick Hilliard -- Chief Technical Officer Internet Neutral Exchange Association CLG -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Thu May 24 22:52:00 2018 From: nick at inex.ie (Nick Hilliard) Date: Thu, 24 May 2018 22:52:00 +0100 Subject: [ixpmanager] MRTG In-Reply-To: References: <18759000-b3ab-666e-0efa-05e0a968c856@inex.ie> <835d47eb-8796-f5ac-4ea9-4716f452aa93@inex.ie> Message-ID: <84335a08-3a56-4638-06d0-910bf4ec53e7@inex.ie> Giorgi Kajaia wrote on 24/05/2018 11:14: > I have changed with vim /etc/mrtg/mrtg.cfg workdir directory to > /srv/mrtg and mrtg started > but on website i see Blank images on traffic . > any fix ? We've just uploaded the tutorial given at LACNIC29 in Panama, which includes a section on setting up MRTG in IXP Manager. The presentation can be downloaded here: > https://www.ixpmanager.org/media/2018/uixp-lacnic29-panama-ixp-manager-workshop2-installation-2018-05-03.pdf The MRTG config is on pages 6-8. It would be a good idea if you used this as a template for how to configure MRTG. Nick From giokajana at gmail.com Fri May 25 07:19:00 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Fri, 25 May 2018 10:19:00 +0400 Subject: [ixpmanager] MRTG In-Reply-To: <84335a08-3a56-4638-06d0-910bf4ec53e7@inex.ie> References: <18759000-b3ab-666e-0efa-05e0a968c856@inex.ie> <835d47eb-8796-f5ac-4ea9-4716f452aa93@inex.ie> <84335a08-3a56-4638-06d0-910bf4ec53e7@inex.ie> Message-ID: I am at 4 line Deploy a cron script to update the MRTG configuration as needed ........ and there is link provided to paste cron script code but link is not working https://docs.ixpmanager.org/features/grapher/ this link . please update On Fri, May 25, 2018 at 1:52 AM, Nick Hilliard wrote: > Giorgi Kajaia wrote on 24/05/2018 11:14: > >> I have changed with vim /etc/mrtg/mrtg.cfg workdir directory to /srv/mrtg >> and mrtg started >> but on website i see Blank images on traffic . >> any fix ? >> > > We've just uploaded the tutorial given at LACNIC29 in Panama, which > includes a section on setting up MRTG in IXP Manager. The presentation can > be downloaded here: > > https://www.ixpmanager.org/media/2018/uixp-lacnic29-panama- >> ixp-manager-workshop2-installation-2018-05-03.pdf >> > > The MRTG config is on pages 6-8. It would be a good idea if you used this > as a template for how to configure MRTG. > > Nick > -------------- next part -------------- An HTML attachment was scrubbed... URL: From barry.odonovan at inex.ie Fri May 25 09:18:00 2018 From: barry.odonovan at inex.ie (Barry O'Donovan) Date: Fri, 25 May 2018 09:18:00 +0100 Subject: [ixpmanager] MRTG In-Reply-To: References: <18759000-b3ab-666e-0efa-05e0a968c856@inex.ie> <835d47eb-8796-f5ac-4ea9-4716f452aa93@inex.ie> <84335a08-3a56-4638-06d0-910bf4ec53e7@inex.ie> Message-ID: <45f8ccc5-91c0-8225-19b3-3d3f950d751a@inex.ie> Docs have been refactored - that can now be found at: https://docs.ixpmanager.org/grapher/mrtg/#generating-mrtg-configuration - Barry Giorgi Kajaia wrote: > I am at 4 line Deploy a cron script to update the MRTG configuration as > needed ........ and there is link provided to paste cron script code but > link is not working https://docs.ixpmanager.org/features/grapher/ this > link . > > please update > > On Fri, May 25, 2018 at 1:52 AM, Nick Hilliard > wrote: > > Giorgi Kajaia wrote on 24/05/2018 11:14: > > I have changed with vim /etc/mrtg/mrtg.cfg workdir directory to > /srv/mrtg and mrtg started > but on website i see Blank images on traffic . > any fix ? > > > We've just uploaded the tutorial given at LACNIC29 in Panama, which > includes a section on setting up MRTG in IXP Manager. The > presentation can be downloaded here: > > https://www.ixpmanager.org/media/2018/uixp-lacnic29-panama-ixp-manager-workshop2-installation-2018-05-03.pdf > > > > The MRTG config is on pages 6-8. It would be a good idea if you > used this as a template for how to configure MRTG. > > Nick > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > Unsubscribe or change options here: https://www.inex.ie/mailman/listinfo/ixpmanager > -- Kind regards, Barry O'Donovan INEX Operations https://www.inex.ie/support/ +353 1 531 3339 From giokajana at gmail.com Fri May 25 09:44:34 2018 From: giokajana at gmail.com (Giorgi Kajaia) Date: Fri, 25 May 2018 12:44:34 +0400 Subject: [ixpmanager] MRTG In-Reply-To: <45f8ccc5-91c0-8225-19b3-3d3f950d751a@inex.ie> References: <18759000-b3ab-666e-0efa-05e0a968c856@inex.ie> <835d47eb-8796-f5ac-4ea9-4716f452aa93@inex.ie> <84335a08-3a56-4638-06d0-910bf4ec53e7@inex.ie> <45f8ccc5-91c0-8225-19b3-3d3f950d751a@inex.ie> Message-ID: and which one is cron script code? to add in /srv/mrtg-cron.sh file . On Fri, May 25, 2018 at 12:18 PM, Barry O'Donovan wrote: > Docs have been refactored - that can now be found at: > > https://docs.ixpmanager.org/grapher/mrtg/#generating-mrtg-configuration > > - Barry > > Giorgi Kajaia wrote: > >> I am at 4 line Deploy a cron script to update the MRTG configuration as >> needed ........ and there is link provided to paste cron script code but >> link is not working https://docs.ixpmanager.org/features/grapher/ this >> link . >> >> please update >> >> On Fri, May 25, 2018 at 1:52 AM, Nick Hilliard > nick at inex.ie>> wrote: >> >> Giorgi Kajaia wrote on 24/05/2018 11:14: >> >> I have changed with vim /etc/mrtg/mrtg.cfg workdir directory to >> /srv/mrtg and mrtg started >> but on website i see Blank images on traffic . >> any fix ? >> >> >> We've just uploaded the tutorial given at LACNIC29 in Panama, which >> includes a section on setting up MRTG in IXP Manager. The >> presentation can be downloaded here: >> >> https://www.ixpmanager.org/media/2018/uixp-lacnic29-panama- >> ixp-manager-workshop2-installation-2018-05-03.pdf >> > ixp-manager-workshop2-installation-2018-05-03.pdf> >> >> >> The MRTG config is on pages 6-8. It would be a good idea if you >> used this as a template for how to configure MRTG. >> >> Nick >> >> >> _______________________________________________ >> INEX IXP Manager mailing list >> ixpmanager at inex.ie >> Unsubscribe or change options here: https://www.inex.ie/mailman/li >> stinfo/ixpmanager >> >> > > -- > > Kind regards, > Barry O'Donovan > INEX Operations > > https://www.inex.ie/support/ > +353 1 531 3339 > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ixp-manager at ics-il.net Fri May 25 15:48:04 2018 From: ixp-manager at ics-il.net (Mike Hammett) Date: Fri, 25 May 2018 09:48:04 -0500 (CDT) Subject: [ixpmanager] Mailing Lists In-Reply-To: <5A73250A.3040907@inex.ie> References: <1507355502.1197.1517494785924.JavaMail.mhammett@ThunderFuck> <1136516007.1264.1517495031137.JavaMail.mhammett@ThunderFuck> <5A73236A.1040504@inex.ie> <193021122.1290.1517495251509.JavaMail.mhammett@ThunderFuck> <5A73250A.3040907@inex.ie> Message-ID: <563939982.1350.1527259682350.JavaMail.mhammett@ThunderFuck> When should we expect to see this? ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Barry O'Donovan" To: "INEX IXP Manager Mailing List" Sent: Thursday, February 1, 2018 8:32:42 AM Subject: Re: [ixpmanager] Mailing Lists Mike Hammett wrote: > Right. That's where I am reading. > > Using the script that artisan mailing-list:sync-script --sh generated, I > get the below error. Fixed in development a few weeks ago: https://github.com/inex/IXP-Manager/issues/368 Will make next release. - Barry _______________________________________________ INEX IXP Manager mailing list ixpmanager at inex.ie https://www.inex.ie/mailman/listinfo/ixpmanager -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Fri May 25 16:50:01 2018 From: nick at inex.ie (Nick Hilliard) Date: Fri, 25 May 2018 16:50:01 +0100 Subject: [ixpmanager] MRTG In-Reply-To: <45f8ccc5-91c0-8225-19b3-3d3f950d751a@inex.ie> References: <18759000-b3ab-666e-0efa-05e0a968c856@inex.ie> <835d47eb-8796-f5ac-4ea9-4716f452aa93@inex.ie> <84335a08-3a56-4638-06d0-910bf4ec53e7@inex.ie> <45f8ccc5-91c0-8225-19b3-3d3f950d751a@inex.ie> Message-ID: <017b6ba4-8b96-e9f2-305b-0e662fcb7411@inex.ie> This is your choice, depending on whether you have mrtg running on the same server or a different server. Nick > Giorgi Kajaia > 25 May 2018 at 09:44 > and which one is cron script code? to add in /srv/mrtg-cron.sh file . > > > Barry O'Donovan > 25 May 2018 at 09:18 > Docs have been refactored - that can now be found at: > > https://docs.ixpmanager.org/grapher/mrtg/#generating-mrtg-configuration > > - Barry > > > > > Giorgi Kajaia > 25 May 2018 at 07:19 > I am at 4 line Deploy a cron script to update the MRTG configuration > as needed ........ and there is link provided to paste cron script > code but link is not working > https://docs.ixpmanager.org/features/grapher/ this link . > > please update > > > Nick Hilliard > 24 May 2018 at 22:52 > Giorgi Kajaia wrote on 24/05/2018 11:14: >> I have changed with vim /etc/mrtg/mrtg.cfg workdir directory to >> /srv/mrtg and mrtg started >> but on website i see Blank images on traffic . >> any fix ? > > We've just uploaded the tutorial given at LACNIC29 in Panama, which > includes a section on setting up MRTG in IXP Manager. The > presentation can be downloaded here: > >> https://www.ixpmanager.org/media/2018/uixp-lacnic29-panama-ixp-manager-workshop2-installation-2018-05-03.pdf >> > > The MRTG config is on pages 6-8. It would be a good idea if you used > this as a template for how to configure MRTG. > > Nick > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > Unsubscribe or change options here: > https://www.inex.ie/mailman/listinfo/ixpmanager > Giorgi Kajaia > 24 May 2018 at 11:14 > I have changed with vim /etc/mrtg/mrtg.cfg workdir directory to > /srv/mrtg and mrtg started > but on website i see Blank images on traffic . > any fix ? > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > Unsubscribe or change options here: > https://www.inex.ie/mailman/listinfo/ixpmanager -------------- next part -------------- An HTML attachment was scrubbed... URL: From alobo at nic.cr Tue May 29 00:19:24 2018 From: alobo at nic.cr (Antonio Lobo) Date: Mon, 28 May 2018 23:19:24 +0000 Subject: [ixpmanager] upgrading from 4.7.0 to 4.7.3 Message-ID: Hello, We can?t upgrade to 4.7.3 We already check out the version we are upgrading to. It?s 4.7.3 git checkout v4.7.3 warning: refname 'v4.7.3' is ambiguous. Already on 'v4.7.3 We have followed the upgrade procedure from: https://docs.ixpmanager.org/install/upgrading/ And If we want to update the db scheme: everything is ok ./artisan doctrine:schema:update --sql Checking if database connected to default entity manager needs updating... Nothing to update - your database is already in sync with the current entity metadata. ./artisan doctrine:schema:update --force Checking if database connected to default entity manager needs updating... Nothing to update - your database is already in sync with the current entity metadata. And after finish the upgrade process we continue in v4.7.0 [cid:image001.png at 01D3F6B0.671D3240] if someone could help us to solve this. Antonio. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 16054 bytes Desc: image001.png URL: From barry.odonovan at inex.ie Tue May 29 08:06:38 2018 From: barry.odonovan at inex.ie (Barry O'Donovan) Date: Tue, 29 May 2018 08:06:38 +0100 Subject: [ixpmanager] upgrading from 4.7.0 to 4.7.3 In-Reply-To: References: Message-ID: <700afb44-cbfc-0083-d46c-4f43494f5d29@inex.ie> Hi Antonio, can provide the output of the following please: git show --oneline -s - Barry Antonio Lobo wrote: > Hello, > > We can?t upgrade to 4.7.3 > > We already check out the version we are upgrading to. > > It?s 4.7.3 > > git checkout v4.7.3 > > warning: refname 'v4.7.3' is ambiguous. > > Already on 'v4.7.3 > > We have followed the upgrade procedure from: > https://docs.ixpmanager.org/install/upgrading/ > > And If we want to update the db scheme: everything is ok > > ./artisan doctrine:schema:update --sql > > Checking if database connected to defaultentity manager needs updating... > > Nothing to update - your database is already in sync with the current > entity metadata. > > ./artisan doctrine:schema:update --force > > Checking if database connected to defaultentity manager needs updating... > > Nothing to update - your database is already in sync with the current > entity metadata. > > And after finish the upgrade process we continue in v4.7.0 > > if someone could help us to solve this. > > Antonio. > > > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > Unsubscribe or change options here: https://www.inex.ie/mailman/listinfo/ixpmanager > -- Kind regards, Barry O'Donovan INEX Operations https://www.inex.ie/support/ +353 1 531 3339 From alobo at nic.cr Tue May 29 15:20:52 2018 From: alobo at nic.cr (Antonio Lobo) Date: Tue, 29 May 2018 14:20:52 +0000 Subject: [ixpmanager] upgrading from 4.7.0 to 4.7.3 In-Reply-To: <700afb44-cbfc-0083-d46c-4f43494f5d29@inex.ie> References: <700afb44-cbfc-0083-d46c-4f43494f5d29@inex.ie> Message-ID: <129EBB35-7EFB-40A4-8032-B35638894CE1@nic.cr> Hi Barry, Sure git show --oneline -s e0c2cc8 Update OSS_SNMP version Thanks in advance Antonio On 5/29/18, 2:06 AM, "Barry O'Donovan" wrote: git show --oneline -s From kyle at stormzero.com Thu May 31 00:27:27 2018 From: kyle at stormzero.com (Kyle Spencer) Date: Wed, 30 May 2018 19:27:27 -0400 Subject: [ixpmanager] SNMP Switch Template Creation Message-ID: How can I configure a new SNMP template for a switch that is not already known by IXP Manager? I am deploying in an IXP that has Huawei switches that I suspect are not going to be in auto detected. Also, where can I find a list of the switches that *are* supported in case I need to advise IXPs on hardware purchases? -- Cell/WhatsApp/Signal: +256790884905 -------------- next part -------------- An HTML attachment was scrubbed... URL: From ixp-manager at ics-il.net Thu May 31 01:52:42 2018 From: ixp-manager at ics-il.net (Mike Hammett) Date: Wed, 30 May 2018 19:52:42 -0500 (CDT) Subject: [ixpmanager] SNMP Switch Template Creation In-Reply-To: References: Message-ID: <1462607611.1932.1527727961567.JavaMail.mhammett@ThunderFuck> https://github.com/opensolutions/OSS_SNMP https://github.com/opensolutions/OSS_SNMP/wiki/Device-Discovery ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Kyle Spencer" To: "INEX IXP Manager Mailing List" Sent: Wednesday, May 30, 2018 6:27:27 PM Subject: [ixpmanager] SNMP Switch Template Creation How can I configure a new SNMP template for a switch that is not already known by IXP Manager? I am deploying in an IXP that has Huawei switches that I suspect are not going to be in auto detected. Also, where can I find a list of the switches that *are* supported in case I need to advise IXPs on hardware purchases? -- Cell/WhatsApp/Signal: +256790884905 _______________________________________________ INEX IXP Manager mailing list ixpmanager at inex.ie Unsubscribe or change options here: https://www.inex.ie/mailman/listinfo/ixpmanager -------------- next part -------------- An HTML attachment was scrubbed... URL: From kyle at stormzero.com Thu May 31 08:26:12 2018 From: kyle at stormzero.com (Kyle Spencer) Date: Thu, 31 May 2018 03:26:12 -0400 Subject: [ixpmanager] SNMP Switch Template Creation In-Reply-To: <1462607611.1932.1527727961567.JavaMail.mhammett@ThunderFuck> References: <1462607611.1932.1527727961567.JavaMail.mhammett@ThunderFuck> Message-ID: Great; thank you! -- Cell/WhatsApp/Signal: +256790884905 On Wed, 30 May 2018, 20:52 Mike Hammett, wrote: > https://github.com/opensolutions/OSS_SNMP > > https://github.com/opensolutions/OSS_SNMP/wiki/Device-Discovery > > > > ----- > Mike Hammett > Intelligent Computing Solutions > > > > > Midwest Internet Exchange > > > > The Brothers WISP > > > ------------------------------ > *From: *"Kyle Spencer" > *To: *"INEX IXP Manager Mailing List" > *Sent: *Wednesday, May 30, 2018 6:27:27 PM > *Subject: *[ixpmanager] SNMP Switch Template Creation > > How can I configure a new SNMP template for a switch that is not already > known by IXP Manager? > > I am deploying in an IXP that has Huawei switches that I suspect are not > going to be in auto detected. > > Also, where can I find a list of the switches that *are* supported in case > I need to advise IXPs on hardware purchases? > > -- > Cell/WhatsApp/Signal: +256790884905 > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > Unsubscribe or change options here: > https://www.inex.ie/mailman/listinfo/ixpmanager > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > Unsubscribe or change options here: > https://www.inex.ie/mailman/listinfo/ixpmanager > -------------- next part -------------- An HTML attachment was scrubbed... URL: From barry.odonovan at inex.ie Thu May 31 09:32:50 2018 From: barry.odonovan at inex.ie (Barry O'Donovan) Date: Thu, 31 May 2018 09:32:50 +0100 Subject: [ixpmanager] SNMP Switch Template Creation In-Reply-To: References: <1462607611.1932.1527727961567.JavaMail.mhammett@ThunderFuck> Message-ID: <8734343d-dcec-fe02-5f80-2b4d1b66b5ac@inex.ie> Kyle, in addition to Mike's reply, as part of the migration of the code controllers that add and manage switches from Zend to Laravel that Yann is currently working on, we're going to make unknown switches non-blocking from here on in. Instead IXP Manager will ask you for the make and model of the switch. We need to release v4.8.0 before end of next week as it's been long awaited by a number of people so it's not clear of this switch work will make that (unlikely) or wait for v4.9.0 later in the summer. - Barry Kyle Spencer wrote: > Great; thank you! > > -- > Cell/WhatsApp/Signal: +256790884905 > > On Wed, 30 May 2018, 20:52 Mike Hammett, > wrote: > > https://github.com/opensolutions/OSS_SNMP > > https://github.com/opensolutions/OSS_SNMP/wiki/Device-Discovery > > > > ----- > Mike Hammett > Intelligent Computing Solutions > > Midwest Internet Exchange > > The Brothers WISP > > ------------------------------------------------------------------------ > *From: *"Kyle Spencer" > > *To: *"INEX IXP Manager Mailing List" > > *Sent: *Wednesday, May 30, 2018 6:27:27 PM > *Subject: *[ixpmanager] SNMP Switch Template Creation > > How can I configure a new SNMP template for a switch that is not > already known by IXP Manager? > > I am deploying in an IXP that has Huawei switches that I suspect are > not going to be in auto detected. > > Also, where can I find a list of the switches that *are* supported > in case I need to advise IXPs on hardware purchases? > > -- > Cell/WhatsApp/Signal: +256790884905 > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > Unsubscribe or change options here: > https://www.inex.ie/mailman/listinfo/ixpmanager > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > Unsubscribe or change options here: > https://www.inex.ie/mailman/listinfo/ixpmanager > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > Unsubscribe or change options here: https://www.inex.ie/mailman/listinfo/ixpmanager > -- Kind regards, Barry O'Donovan INEX Operations https://www.inex.ie/support/ +353 1 531 3339 From ixp-manager at ics-il.net Thu May 31 13:37:11 2018 From: ixp-manager at ics-il.net (Mike Hammett) Date: Thu, 31 May 2018 07:37:11 -0500 (CDT) Subject: [ixpmanager] SNMP Switch Template Creation In-Reply-To: <8734343d-dcec-fe02-5f80-2b4d1b66b5ac@inex.ie> References: <1462607611.1932.1527727961567.JavaMail.mhammett@ThunderFuck> <8734343d-dcec-fe02-5f80-2b4d1b66b5ac@inex.ie> Message-ID: <1935929546.2136.1527770229046.JavaMail.mhammett@ThunderFuck> " we're going to make unknown switches non-blocking from here on in" What does that mean? :-) " We need to release v4.8.0 before end of next week" WOOHOO!! :-) I don't know that I've ever used a switch that was "supported" by IXP Manager. I've submitted the info to OSS SNMP each time, but I don't go back and delete what I have and re-add it via the main method. ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Barry O'Donovan" To: "INEX IXP Manager Mailing List" , "Kyle Spencer" Sent: Thursday, May 31, 2018 3:32:50 AM Subject: Re: [ixpmanager] SNMP Switch Template Creation Kyle, in addition to Mike's reply, as part of the migration of the code controllers that add and manage switches from Zend to Laravel that Yann is currently working on, we're going to make unknown switches non-blocking from here on in. Instead IXP Manager will ask you for the make and model of the switch. We need to release v4.8.0 before end of next week as it's been long awaited by a number of people so it's not clear of this switch work will make that (unlikely) or wait for v4.9.0 later in the summer. - Barry Kyle Spencer wrote: > Great; thank you! > > -- > Cell/WhatsApp/Signal: +256790884905 > > On Wed, 30 May 2018, 20:52 Mike Hammett, > wrote: > > https://github.com/opensolutions/OSS_SNMP > > https://github.com/opensolutions/OSS_SNMP/wiki/Device-Discovery > > > > ----- > Mike Hammett > Intelligent Computing Solutions > > Midwest Internet Exchange > > The Brothers WISP > > ------------------------------------------------------------------------ > *From: *"Kyle Spencer" > > *To: *"INEX IXP Manager Mailing List" > > *Sent: *Wednesday, May 30, 2018 6:27:27 PM > *Subject: *[ixpmanager] SNMP Switch Template Creation > > How can I configure a new SNMP template for a switch that is not > already known by IXP Manager? > > I am deploying in an IXP that has Huawei switches that I suspect are > not going to be in auto detected. > > Also, where can I find a list of the switches that *are* supported > in case I need to advise IXPs on hardware purchases? > > -- > Cell/WhatsApp/Signal: +256790884905 > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > Unsubscribe or change options here: > https://www.inex.ie/mailman/listinfo/ixpmanager > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > Unsubscribe or change options here: > https://www.inex.ie/mailman/listinfo/ixpmanager > > _______________________________________________ > INEX IXP Manager mailing list > ixpmanager at inex.ie > Unsubscribe or change options here: https://www.inex.ie/mailman/listinfo/ixpmanager > -- Kind regards, Barry O'Donovan INEX Operations https://www.inex.ie/support/ +353 1 531 3339 _______________________________________________ INEX IXP Manager mailing list ixpmanager at inex.ie Unsubscribe or change options here: https://www.inex.ie/mailman/listinfo/ixpmanager -------------- next part -------------- An HTML attachment was scrubbed... URL: From carlos.saura at csuc.cat Thu May 31 14:08:06 2018 From: carlos.saura at csuc.cat (Carlos Saura) Date: Thu, 31 May 2018 15:08:06 +0200 Subject: [ixpmanager] Sflowtool Ipv6 error [PeeringMatrix] Message-ID: Hello, When I execute the command sflowtool +4 -p 6343 -l for listen in ipv4 and ipv6 I have this error: "v4 bind() failed, port = 6343 : Address already in use" and I can only see ipV4 directions. And when execute ./sflowtool -6 -p 6343 -l I see only ipv4 directions. I want to see a Peering Matrix with ipv4 and ipv6 but with sfloowtol i can not sniff Ipv6. Someone have the same problem ??? Thank you! -- - no title specified ------------------------------------------------------------------------ Carlos Saura Torres T?cnic de Comunicacions Consorci de Serveis Universitaris de Catalunya (CSUC) Gran Capit?, 2 (Edifici Nexus) ?08034 Barcelona T. 93 551 62 07 ?F. 93 205 6979 ?carlos.saura at csuc.cat www.csuc.cat ?Twitter @CSUC_info ?Facebook ?Linkedin Subscriu-te al butllet?; (www.csuc.cat/butlleti) ------------------------------------------------------------------------ -------------- next part -------------- An HTML attachment was scrubbed... URL: From nick at inex.ie Thu May 31 14:35:02 2018 From: nick at inex.ie (Nick Hilliard) Date: Thu, 31 May 2018 14:35:02 +0100 Subject: [ixpmanager] Sflowtool Ipv6 error [PeeringMatrix] In-Reply-To: References: Message-ID: <7430f665-f533-6ac0-0b0f-a3cdb61f156d@inex.ie> Carlos Saura wrote on 31/05/2018 14:08: > When I execute the command sflowtool +4 -p 6343 -l for listen in ipv4 > and ipv6 I have this error: > "v4 bind() failed, port = 6343 : Address already in use" and I can only > see ipV4 directions. This means that there is another instance of sflowtool which is running on that server and which is listening to the *:6343 socket on ipv4. If you run "netstat -ant | grep 6343", you should see a socket in LISTEN state. > And when execute ./sflowtool -6 -p 6343 -l I see only ipv4 directions. > > I want to see a Peering Matrix with ipv4 and ipv6 but with sfloowtol i > can not sniff Ipv6. Someone have the same problem ??? The "-4" and "-6" command-line arguments to sflowtool only specifies whether sflowtool receives sflow datagrams on the collector over ipv4 or ipv6. It doesn't affect whether the sflow datagrams contain ipv4 or ipv6 samples. If you're not seeing ipv6 samples, then it's possible that your switches aren't exporting ipv6 samples for some reason. The IXP Manager sflow-to-rrd script doesn't really care whether samples are ipv4 or ipv6, and the "-4" / "-6" command-line arguments to sflowtool don't affect this. Nick