[ixpmanager] Error when Adding Switch via SNMP on IXP Manager

[k.abdalla at q-ab.com]

Thanks for great help , I tried to add new device but it did'nt work can
you please help me  

On 2017-11-28 04:05, Barry O'Donovan wrote: 

> Hi K,
> 
> 3) Remove the log file, retry and then post the entire log file to a
> pastebin and provide the URL please.
> can you please see the log *https://pastebin.com/whR4KWP0*

Thanks.

That's narrowed it down to an issue with OSS_SNMP - the library we use
to SNMP poll the switches. Looks like yours is not fully supported.

Can you following the instructions from:

https://github.com/opensolutions/OSS_SNMP/wiki/Device-Discovery#adding-new-devices

Specifically, provide:

1) switch make, model, OS name and version

2) the output of:

    snmpget -c $community -On -v 2c $hostname .1.3.6.1.2.1.1.1.0 

> .1.3.6.1.2.1.1.1.0 = STRING: "CISCO IOS SOFTWARE, C3560E SOFTWARE (C3560E-UNIVERSALK9-M), VERSION 12.2(55)SE5, RELEASE SOFTWARE (FC1)
> TECHNICAL SUPPORT: HTTP://WWW.CISCO.COM/TECHSUPPORT
> COPYRIGHT (C) 1986-2012 BY CISCO SYSTEMS, INC.
> COMPILED THU 09-FEB-12 18:32 BY PROD_REL_TEAM"

> snmpget -c $community -On -v 2c $hostname .1.3.6.1.2.1.1.2.0
     .1.3.6.1.2.1.1.2.0 = OID: .1.3.6.1.4.1.9.1.796

3) if you want to record the serial number and your device supports it,
then the OID and a sample response for that also. E.g. on a Brocade FESX
it's:

    snmpget -c $community -On -v 2c $hostname
.1.3.6.1.4.1.1991.1.1.1.1.2.0

Barry 

Thanks again !and much appreciated
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.inex.ie/pipermail/ixpmanager/attachments/20171128/bf43add9/attachment.html>