[ixpmanager] Error when Adding Switch via SNMP on IXP Manager

[k.abdalla at q-ab.com]

Thanks ,  
On 2017-11-27 02:58, Barry O'Donovan wrote: 

> Hi,
> 
> k.abdalla at q-ab.com wrote: Hi ,
> 
> Thanks for reply .. the switch is cisco catalyst 3560 , the log shows that there is an
> error in bower

That's unlikely - I suspect there is more than one error thrown.

Can you:

1) make sure IXP Manager is properly installed including the bower step?

http://docs.ixpmanager.org/install/manually/#install-composer-and-bower

done , it's installed correctly  

> switch IOS version is :C3560E-UNIVERSALK9-MZ.122-55.SE5.BIN
> 2) Enable development more for better debugging? I.e. change the
> following in .env:
> 
> APP_ENV="development"
> APP_DEBUG=true
> it's also configured 
> 
> 3) Remove the log file, retry and then post the entire log file to a
> pastebin and provide the URL please.

> can you please see the log HTTPS://PASTEBIN.COM/WHR4KWP0
 Thanks,
 - Barry

"

REMOTE_PORT: 50262
REQUEST_METHOD: GET
REQUEST_URI: /bower_components/bootbox.js/bootbox.js

2017-11-26T13:39:47+00:00 DEBUG (7) [192.168.1.251]: Logger instantiated
2017-11-26T13:39:47+00:00 DEBUG (7) [192.168.1.251]:

2017-11-26T13:39:47+00:00 DEBUG (7) [192.168.1.251]:
ErrorController::errorActio n()
2017-11-26T13:39:47+00:00 DEBUG (7) [192.168.1.251]:

************************************************************************
****************************** EXCEPTIONS
*******************************
************************************************************************

--------------------------- EXCEPTION --------------------------

Message: Invalid controller specified (bower_components)
Line: 248
File:
/srv/ixpmanager/vendor/zendframework/zendframework1/library/Zend/Controlle
r/Dispatcher/Standard.php "

Do I need to uninstall /reconfigure "bower" ?

Thanks

On 2017-11-26 07:51, Edrich de Lange wrote:Hi there!

Welcome to the list :-)
Thank you !

So we had a similar issue when adding some obscure juniper switches,
but it ended up adding the switches correctly even though it said it
had troubles.

But I think a bit more information is needed. Eg switch type, and are
there any usefull errors in the log file? (assuming its a standard
setup, look in /srv/ixpmanager/storage/logs)

Kind regards

On Sun, Nov 26, 2017 at 3:26 PM, <k.abdalla at q-ab.com
<mailto:k.abdalla at q-ab.com>> wrote:

Dear all

I'm new to the list , so sorry if it;s repeated question
when on Home / Switches / List and click the + to add a switch.
Filled in all fields:
Name
Hostname
Type
Cabinet
infrastructure
SNMP Community

it gave the atached error

_______________________________________________
INEX IXP Manager mailing list
ixpmanager at inex.ie <mailto:ixpmanager at inex.ie>
https://www.inex.ie/mailman/listinfo/ixpmanager [1
<https://www.inex.ie/mailman/listinfo/ixpmanager>]

Links:
------
[1] https://www.inex.ie/mailman/listinfo/ixpmanager
_______________________________________________
INEX IXP Manager mailing list
ixpmanager at inex.ie <mailto:ixpmanager at inex.ie>
https://www.inex.ie/mailman/listinfo/ixpmanager_______________________________________________
INEX IXP Manager mailing list
ixpmanager at inex.ie
https://www.inex.ie/mailman/listinfo/ixpmanager
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.inex.ie/pipermail/ixpmanager/attachments/20171128/597f5a68/attachment.html>