[ixpmanager] Multi Macs

[Joe Wooller]

It should be, 

when i walk the port names are;

root at dev:/var/www/IXP-Manager/tools/runtime/mrtg# snmpwalk -c ghv138 -v2c 198.32.212.201 1.3.6.1.2.1.31.1.1.1.1 | grep xe-0/0/0
iso.3.6.1.2.1.31.1.1.1.1.699 = STRING: "xe-0/0/0"
iso.3.6.1.2.1.31.1.1.1.1.700 = STRING: "xe-0/0/0.0"


I am using xe-0/0/0.0, so I can get the macs, I may need to remove the .0 to get any sensible data perhaps?

Joe

On 11/07/2012, at 10:42 PM, Nick Hilliard wrote:

> On 11/07/2012 15:31, Joe Wooller wrote:
>> root at dev:/var/www/mrtg# head ixp_peering-aggregate-bits.log 
>> 1342017001 -1 -1
>> 1342017001 0 0 0 0
> 
> ok, this means that the port names that you've defined for your switches
> are not matching up with the entry for ifName in SNMP.
> 
> Can you run the following command and use the suggested port names:
> 
> # snmpwalk -v 2c -c <community> <switchname> IF-MIB::ifName
> 
> Nick
> 
> _______________________________________________
> INEX IXP Manager mailing list
> ixpmanager at inex.ie
> https://www.inex.ie/mailman/listinfo/ixpmanager
> 
> !DSPAM:1,4ffd90de24051428316805!
> 
>